The Clean Air Act Blog: Archive for the ‘Services’ Category

Maintenance Really Does Save Money

Monday, June 20th, 2011

When it comes to your home heating and cooling systems, you really cannot go wrong with proper annual maintenance. While it may seem like an unnecessary expense, especially if your systems are relatively new, you will save a lot in the long run if you pay that small fee once a year for each system.

During a maintenance visit, a technician can thoroughly clean out your heating or cooling system and check all parts to make sure they are not showing signs of excessive wear and tear. If they do find a problem or a part that needs to be replaced, they will be able to make the necessary repairs quickly and you will not have to worry about calling someone out later for an emergency visit.

Also, catching problems early like this means that repairs will likely involve fewer parts and cost much less than they would if you let the problem go and it became more widespread. The truth is that your heating or cooling system can continue to work when one or another of its parts is not working correctly, but that means that other parts of the system have to work overtime to create the same result.

Your heating or cooling system will also be much more energy efficient if it receives regular tune ups and attention from a professional. Even the best new systems lose a small percentage of their efficiency each year that they are in operation. While this is not much from year to year, the cumulative effect will soon cause your energy bills to climb higher than necessary.

Paying for regular maintenance, then, can actually save you money because it will mean you pay less each month to run your system. And it is never too late to start. Even if your heating or cooling system is not new, it will benefit from a thorough cleaning and tune up. You may be quite surprised how much your energy bills go down after this type of service has been performed.

Annual maintenance can also help you to get more for your money by extending the useful life of the heating or cooling system. Many systems that are properly maintained can last even beyond their expected life span, meaning that you will not have to replace it as soon as you would have otherwise. For all of these reasons, the minimal cost of an annual maintenance visit is well worth paying over the long term.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Maintenance Really Does Save Money

Heat Recovery Ventilator – What Is It and When Do You Need It?

Friday, June 17th, 2011

While the design of modern homes is to retain as much energy as possible while minimizing the cost of heating and cooling, that very design can have a negative impact on your indoor air quality. Because air cannot pass freely between indoor and outdoor environments, you are stuck breathing the same air day after day.

Luckily, there are t options that will exchange the heat in your indoor air to the outdoor air as it enters your home. In effect, you can retain all of the heat your home produces each day before it leaves the house. It works equally well in the summer to retain the cooled air your air conditioning units produce.

How Heat Recovery Works

Heat recovery ventilators come in many forms, including simple ventilation, heat exchange, or air exchanging. There are even some indoor heat pumps that will carefully draw heat from the air as it’s removed from your home and recirculate it through your air ducts.

The idea is the same no matter how the system is installed. As air leaves your home through a ventilator, a counter-flow heat exchanger transfers energy between the air leaving and entering your home. So, instead of warm air leaving and cold air entering, the air coming into your home takes the heat from the air leaving your home. Air comes and goes, but heat stays inside.

In the summer, the same system works in reverse to remove heat from the air coming into your home and keep it outside. The one thing to keep in mind with a heat recovery ventilator is that it doesn’t retain the humidity in your home as an energy recovery ventilator would. If you live in an area with very high or very low humidity during summer or winter, an ERV may be a better solution for your needs.

Air Quality Benefits

The goal of a good heat recovery ventilator is not just to retain the heated or cooled air in your home. It is also to ensure you have clean, fresh air to breathe each day. Most people don’t realize, but when you don’t circulate your air and your home is sealed up with enhanced weather-stripping and high quality insulation, unwanted contaminants begin to build up. A heat recovery ventilator makes sure you not only get fresh air, but that it’s properly filtered and the heat or cooling your comfort system produces is retained. No money is lost, energy is saved, and your family stays comfortable and healthy – everyone wins.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Heat Recovery Ventilator – What Is It and When Do You Need It?

Understanding House Ventilation Options

Wednesday, June 15th, 2011

All the fancy air quality control tools in the world are useless if you don’t have a good ventilation system to circulate air through your home each day. An air filter removes larger particles like dust, dander and pollen, and an electronic air filter removes smaller particles like bacteria, mold, and gases. However, your indoor air will still be poor without a fresh supply of air constantly circulating in from outdoors.

Types of Ventilators

There are a few options here, depending both on the number of contaminants your home has and the amount of heated or cooled air you are willing to lose each day through vents.

The simplest method is an exhaust fan. Fans blow air from your home, creating a negative pressure zone inside. Air inlets then allow new air to enter your home and equalize that pressure. There are also balanced exhaust fans – one fan blowing indoor air out and another fan pulling fresh air in. If you have open flames or gas burning appliances, a balanced exhaust fan is necessary to keep the flames from going out due to the negative pressure caused by a single outlet exhaust fan.

Traditional ventilation, while simple, is also inefficient. In the middle of winter it blows all of your heated air outside and in the summer, it does the same to your cooled air. Your home comfort system likely can keep up with the loss of heat or cooling, so you won’t be less comfortable, but you will certainly pay more on your energy bill.

That’s why heat and energy recovery ventilators are popular in many homes. Especially if you went to the trouble of having your home sealed up tightly to minimize energy loss, these ventilators will save you money.

When air is ventilated through a recovery unit, the energy and heat is transferred between indoor and outdoor air as it passes. In the winter, this means the energy in your indoor air is retained and during the summer, the energy in outdoor air is removed before it enters your home.

Which Method is Best?

The method you choose will depend largely on your current cost of heating and cooling and what types of contaminants you face. Energy recovery ventilators have the added benefit of patching directly into your indoor air quality units, so you won’t need to worry about new contaminants coming in either.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Understanding House Ventilation Options

How a Thermostat Works

Monday, June 13th, 2011

Your thermostat is designed to closely monitor and maintain the temperature in your home. When you flip the switch, you want your furnace or air conditioner to respond immediately. So, it’s a good idea to learn how it works so that if there is a problem, not only will you know better what needs to be fixed – you can decide whether to call a professional in for help.

Thermostats shouldn’t need input from you other than to set the initial temperature. From there, they are automatic switches. A thermometer inside the thermostat measures the indoor air temperature. When it gets above or below the limit you’ve specified, it triggers the thermostat to send a message to your home comfort system and keep things nice and comfortable.

Types of Thermostat

Thermostats come in two forms –electromechanical and electronic. An electromechanical thermostat is the simplest and has been used for decades to regulate temperature in homes. It has a simple strip or coil of metal that expands as the temperature rises and contract as it lowers. A mercury thermometer is placed on top of the strip. The coil’s movements cause the vial to tip as the temperature changes. There is a pair of electrical contacts on either end of the vial. The mercury can absorb that electrical current when the electrical contacts touch the thermometer. The mercury then acts as a switch to turn on your comfort system.

An electronic thermostat simply has an electronic sensor that measures the indoor air temperature. You set a temperature for your room and when it changes significantly, the switch inside your electronic thermostat is triggered, causing it to turn on your comfort system.

Ways to Upgrade Your Thermostat

Most homes only need the bare minimum in their thermostats. However, there is some very exciting technology on the market these days that can add quite a bit of value to your system. Not only can you install a programmable thermostat, you can opt for zone control systems that allow multiple thermostats in different rooms of your home.

Programming allows you to set temperatures for certain times of the day. This is especially great if you are gone from the house for long periods of time each day. Why heat or cool a home when it is empty? And if you have multiple people with different temperature needs, zone control temperature control allows you to set specific temperatures for specific rooms in your home – a very enticing option for large families or multi-story homes.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on How a Thermostat Works

What to Do if Your Ceiling Fan Does Not Work

Friday, June 10th, 2011

A ceiling fan is a great addition to your home. It can keep you cool all on its own on moderately warm days and it will help to take on some of the cooling load even on days when you do need to use the air conditioner as well. Plus, you can even use your ceiling fan in the winter to keep the warm air from your heating system circulating properly.

But just like anything else, your ceiling fan will encounter some sort of problem from time to time. While there are certainly some things that you cannot fix on your own, it is a good idea to check on a few items before you call in a professional repair person.

For instance, if you switch on the fan and nothing happens, make sure that all of the controls are in the place they should be. Most ceiling fans have a chain or dial on the body of the fan itself that controls the direction that the fan turns and can even turn it off. However, there is usually also a power switch on the wall. If you flip the switch and the fan does not turn on, there is a good chance that the setting on the fan itself is in the off position.

After ensuring that all of these switches and controls are calibrated properly, you can also take a look at the fuse and the breaker that the fan is connected to. If the breaker is thrown or the fuse is blown, the fan is not getting power and you will have to replace the fuse or reset the breaker to restore power to that circuit.

If that does not solve the mystery either, you may want to test the blades themselves to see if they seem to be stuck on a physical impediment. Ceiling fans do occasionally need to have their bearings lubricated and this is a relatively simple task that you can carry out on your own as well.

However, if none of these actions seems to solve the problem, then you will probably need to call in a professional to assess the situation and make the necessary repairs. There may be a mechanical problem within the fan itself or the wiring could be frayed or fused and these are not repairs you should attempt to make on your own.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on What to Do if Your Ceiling Fan Does Not Work

Ductless vs. Duct Air Conditioning Systems

Wednesday, June 8th, 2011

When it comes time to pick out a new air conditioning system for your home, you will have to make the choice between ductless and duct models. While both of these types of systems have their advantages, the specifics of your situation will go a long way to determining which one is right for you.

Ductless air conditioning systems are becoming more and more popular these days for a number of reasons. For one, they are generally considered more energy efficient than their ducted counterparts. Also, ductless systems are often cheaper and simpler to install, particularly in a house that does not already contain ductwork.

These types of air conditioners use refrigerant lines to connect the indoor unit or units to the outdoor compressor. The refrigerant lines take up much less space than ducts do and they also are much easier to install. Refrigerant lines can also reach into areas of your house that ducts may not be able to, making it possible for you to bring the benefits of air conditioning to places that did not have access to it before.

The indoor unit of a ductless air conditioning system can generally handle the cooling load of one or two rooms, but if you want to cool a larger space, it will be necessary to install multiple indoor units throughout the house. All of these units can connect to the same outdoor compressor and they can also be controlled individually. That means that you can set different temperatures in different parts of your house and you do not have to pay to cool the entire space if no one is occupying certain parts at the moment.

A duct air conditioning system also involves indoor and outdoor components. However, these elements are connected to each other by a system of ducts rather than by refrigerant lines. In a duct system, cooled air is brought inside from the compressor and then circulated through various ducts by the air handler.

The latest duct systems are quite energy efficient as well, and they can also be coupled with zone control systems to create different climate zones within your house. Particularly if you already have some ducts in place, a duct air conditioning system can be a great option for you.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Ductless vs. Duct Air Conditioning Systems

Why Install a Ductless Air Conditioner?

Monday, June 6th, 2011

As you explore your options in terms of a new home air conditioning system, you will probably have to decide whether you want a system that uses ducts to get the cooled air around the house or one that is considered ductless. Each type of air conditioning system is appropriate in certain situations, so it is important to understand the benefits of each before you can make a decision.

Duct air conditioning systems are the more traditional type on the market today. They generally consist of an outdoor compressor and condenser unit and an indoor air handler. The outdoor unit passes the cooled air through ducts to the air handler, which then takes over circulating the air through the house and back out to the condenser again.

It makes sense to install this type of air conditioning system if you have a large house or if you have ducts already in place. Duct air conditioners can cool a moderate to large sized house quite effectively and they can also be coupled with zone control systems to give you multiple climate zones within your house.

Ductless air conditioners, as their name suggests, do not rely on a system of air ducts to get cooled air distributed throughout your house. Instead, these types of systems use refrigerant lines to transfer coolant from the outdoor compressor to the indoor, wall mounted units. Each of these indoor units can take care of cooling one or two rooms, but in order to cool an entire house with one of these systems, you will need to install multiple indoor units.

However, these multiple indoor units can all be connected to the same outdoor compressor, and they can also be controlled independently. That gives you much greater control over which parts of your house are cooled and how much energy you are using to cool areas that may or may not be occupied.

Ductless air conditioners are generally more energy efficient than ducted ones, but their real advantage comes from the facts that they can be installed even in places where air ducts do not exist or cannot go. If you do not already have ductwork in your house, installing a duct system will add considerably to the price of installing a ducted air conditioning system. In a case like this, a ductless system is much easier and cheaper to install and certainly makes more sense.

Continue Reading

Tags:
Posted in Services | Comments Off on Why Install a Ductless Air Conditioner?

UV Germicidal Lighting

Friday, June 3rd, 2011

With a state of the art home comfort system in place, complimented by a high tech indoor air cleaner, you may think you’re set to take on climate and contaminant related challenges to your air quality. But you’re probably missing one thing, and that’s the ability to remove living contaminants like bacteria and viruses from your indoor air.

Unlike non-living particulate indoor air contaminants, bacteria and viruses are not easily caught by indoor air filters or ionizers. They often slip through and continue to circulate again and again through your home, greatly increasing the likelihood that you and your family will get sick. They also tend to reproduce, so the longer you go without eliminating these germs, the more of them there will be.

Killing those Germs for Good

Fortunately there is a technological solution to this indoor air quality problem. The inclusion of ultra violet lights into your air purification system not only specifically targets bacteria and viruses; it helps to slow the spread of disease when someone in your home gets sick.

UV germicidal lights are extremely effective at removing all types of living contaminants from your indoor air. Unlike HEPA filters and air ionizers, UV germicidal lights don’t try to remove these contaminants by trapping them. Instead, they kill them outright, making sure that the germs can’t stick around to reproduce or work their way free of the containment system.

Installation and Maintenance

For most indoor air contaminants, you want to have someone test your air first. However, with bacteria and viruses, you can rest assured that they are always in the air around you. It often only takes a smaller number of pathogens to make someone ill.

Most UV germicidal lights are easy to integrate into your existing indoor air cleaning system. They are usually installed just past the filters so they can catch the germs without other indoor air contaminants getting in the way. And best of all, UV germicidal lights require very little attention or maintenance.

Simply put them in place and let them do their work. You should schedule a routine maintenance visit every so often to make sure that no part of your indoor air cleaning system needs to be repaired or replaced. But other than that, installing UV germicidal lights in your home allows you to relax and enjoy a completely contaminant free living environment.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on UV Germicidal Lighting

Mold…What if I Have Mold?

Wednesday, June 1st, 2011

No one wants to find mold. But, even if you’re not aware of it, mold is probably lurking somewhere in the damp, dark crevices of your home. And mold is particularly likely to grow in homes with improperly regulated humidity. Luckily, because we know that, there are quite a few things we can do to stop the growth of mold in its tracks and save your home from unsafe air quality and the damaging effects of those little spores.

The Dangers of Mold

As mold grows, it can do damage to your woodwork and other areas of your home. It also contributes to indoor air quality issues because mold spores are a significant indoor air contaminant. Many people are allergic to mold spores, so if you or someone else in your household has experienced allergy symptoms that you can’t explain, mold spores are a likely culprit.

If you find out there is mold in your home, don’t panic just yet. There are some things you can do to address the problem and get mold out of your house for good. Your main task will be getting rid of the mold that is already there. This isn’t necessarily easy because of the areas mold tends to grow in. But, even with the proper air quality treatment, your home and health is still at risk if you don’t target that existing mold fast.

Stopping Mold in Its Tracks

Just getting rid of existing mold won’t solve the problem, though. Mold keeps coming back as long as there is an environment to support it – and that means moisture. Mold requires water to grow, so the chances are that if you have a mold problem in your home, you also have a humidity problem. Getting your indoor humidity under control will make it much easier to remove and keep mold out of your home for good.

There are plenty of good humidification systems on the market today. They can be easily integrated into your home heating and cooling system and provide great, consistent humidity control. Make sure you get one that’s large enough for your home. An indoor air quality professional can help you make that determination. Once you have a good humidification system in place, you’ll notice a huge difference in your overall indoor air quality, and hopefully the problem won’t return anytime soon.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Mold…What if I Have Mold?

A Different Way to Zone Your Heating

Monday, May 30th, 2011

One of the most frustrating things about traditional heating is that you must pay for the entire home to be heated. You flip on the thermostat and you get the same temperature for every room. Vent covers can reduce how much heat gets to each room, but if you want one room to be cooler than another, how do you do it without installing an expensive zone control system?

Vent Levers for Adjustable Air Flow

The easiest way to control the flow of air in your heating system is to use a vent lever adjustable air flow system that allows you to actually control where the air goes. These systems are installed directly on your furnace’s air handler. Each vent lever can be attached to a specific thermostat in your house or the vent levers can be opened and closed manually from the basement. When one of the thermostats is turned off, a vent lever will close off air flow to that particular room and stop any heat from being distributed there.

The system itself is not as easy to use as a zone control system but because the technology is simple and it takes only a few seconds to the turn the vent levers, it’s a viable and effective method to control your heating if you cannot afford zone control. If you’re not sure whether this is a good solution for your particular furnace, an HVAC contractor can help.

How to Get Vent Levers Installed in Your Home

If this sounds like a good solution for you, take some time and contact your local HVAC service provider to learn more about what it takes to have vent levers installed. For some systems it is relatively easy to add them to an existing air handler. In older systems or in the case of a boiler, you may need to install more specific types of handlers to control the flow of heating to each room in your home. A professional can give you a better idea of what your home needs and how it can best be setup.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on A Different Way to Zone Your Heating