Signs Your Heat Pump Needs Repairs

January 27th, 2014

For Portland’s weather, a heat pump is a great option for year-round comfort in your home. They can handle any level of heat with their cooling power, and our winter temperatures rarely drop to the extremes that will give their heating much trouble.

But a heat pump is only as good as the state of repair that it’s in. When your heat pump shows any signs of troubling behavior, you need to have professional repairs done on the double. We’ve put together a list of common warning signs of a heat pump that needs attention.

Call Clean Air Act for heating repair technicians in Portland, OR who can handle your heat pump issues.

Warning signs of heat pump problems

  • Ice developing along the coils: If you notice ice along the coil that is currently operating as the evaporating coil (indoor coil in cooling mode, outdoor coil in heating mode), then your heat pump could be suffering from one of two problems. There might be a refrigerant leak, in which case you will need repairs to find and seal the leak and then recharge the lost refrigerant. The second possibility is the coil has become too dirty to allow easy heat absorption, and this will require a technician to remove and clean the coil. Just scraping the ice off will not do any good. It will come back and continue to grow.
  • Grinding or clicking noises from the cabinet: Unusual noises from a heat pump cabinet are rarely good signs. The two most common warning noises are clicking and grinding. Clicking is usually a signal that one of the capacitors is on the edge of failing. (Capacitors transfer voltage to start the motors and keep them running.) Grinding tends to mean motors that have lost lubrication or become dirty and will soon burn out. In both cases, you’ll need a repair technician to replace the failing unit(s).
  • The heat pump remains stuck in one mode: If your heat pump refuses to cool or refuses to heat, then the issue is probably from the reversing valve. This valve allows refrigerant to change the direction of its flow through the unit, which is how the heat pump switches from heating to cooling. If the reversing valve malfunctions, the heater will remain in one mode. Call for repairs to have the reversing valve replaced.

You need professional repairs

Heat pumps are complex devices that require a precise balance of different systems—refrigerant loops, compressors, air handlers, motors, thermostats—to work accurately. Without special training and tools, it’s almost impossible to repair them. Amateur repairs are likely to do the opposite: cause further damage to the unit.

Put away the do-it-yourself kit and call up Clean Air Act. We have heating repair technicians in Portland, OR ready 24/7 to assist you.

Continue Reading

Reasons to Install Amana Heat Pumps

January 22nd, 2014

Although the heavy rainfall in Portland may sometimes dampen spirits, we should always keep in mind that in the Pacific Northwest we enjoy relatively mild winters compared to much of the nation. This weather is ideal for a heat pump, a comfort system that provides both heating and cooling. Heat pumps can handle the hottest days of a Portland summer without trouble, and the temperatures in winter rarely drop below a heat pump’s ability to provide warmth.

At Clean Air Act, we often suggest Amana heat pumps to many of our customers looking for heating services in Portland, OR. Here are some of the reasons we recommend them:

  • Heating energy efficiency: Heat pumps use electricity to run mechanical parts, unlike electric furnaces or boilers, which use electricity to directly warm up air or water. This means that heat pumps only use a fraction of the power of other electric systems. They use less power than gas, oil, and propane heaters as well. A family of 4 can save up to 30% annually off their heating bills with a heat pump. Amana offers some of the most high-efficiency models available, far exceeding the U.S. government’s requirements for the Energy Star label.
  • Variety of options: Amana makes numerous sizes and types of heat pumps to fit any space or heating/cooling budget. With knowledgeable installers trained on Amana models, you are almost guaranteed to find a system that will match your home’s needs and your energy-saving plans.
  • Environmentally friendly: Amana heat pumps use R-410A, a chlorine-free refrigerant, to move heat into or out of your home. These heat pumps have little negative impact on the environment and produce no ozone-depleting emissions.
  • Unit replacement warranty: Amana offers a lifetime limited warranty that will pay for parts and replacement for 10 years. If you have regular maintenance for your unit and all necessary repairs done on time, you can expect the heat pump to last even longer than that.

Get started with heat pump installation

Because of the variety of Amana heat pumps available, you’ll need the assistance of installation experts to help you make the choice for the unit that will give you optimal heating and cooling. Call Clean Air Act today and talk to our specialists in heating services in Portland, OR. You’ll soon be on your way to enjoying all the benefits above and many more from your Amana heat pump.

Continue Reading

Benefits of High Velocity Heating Systems

January 14th, 2014

The technology of home heating is a constantly advancing field. Although many older heating systems still remain popular because of their flexibility and reliability—such as furnaces—new technology continues to become available to homeowners that gives them methods to find better comfort than ever before. One of these new systems now gaining popularity is the high velocity heating system.

We’ll explain briefly how high velocity heating systems work and how they can benefit your heating. For information about having a high velocity system installed, contact the Portland, OR heating system technicians at Clean Air Act today.

The high velocity system and how it can benefit you

A high velocity system, also called a small duct high velocity system (SDHV), uses high pressure forced air delivery through a network of mini-ducts that are much smaller than the standard ducts used for furnaces and heat pumps. By creating areas of high pressure, a SDHV is able to send out conditioned air from its ducts at extremely high velocity levels (2000 ft/sec) while using only half the airflow of a regular system.

What are the main advantages?

  • Less dust build-up: Because air is continually circulated from a constant fan, dust and other debris in the air will not build up inside the mini-ducts and can be easily filtered out. This means higher quality indoor air in your home.
  • Even temperatures: Standard forced-air systems blow hot air into a room, where it rises first to the ceiling. A high velocity system moves air from a high pressure area to a low pressure area at such a speed that it creates currents that distribute the air evenly from floor to ceiling. No more hot or cold spots.
  • Easier installation: Mini-ducts are small enough to install within your existing walls without major construction. You don’t have to redesign your home in order to fit larger ducts.
  • Quiet operation: Although you might think that something that’s “high velocity” would make a great deal of noise, these systems run much quieter than other air handlers. With noise dampeners, the sound can be reduced to nothing.

Look into high velocity installation

A high velocity system may sound too good to be true, but they’re real and they work. But before you rush out to have one installed, contact experts to look over your house and see if a high velocity heating system is the best choice for you and your budget. Contact Clean Air Act and let our trained staff help you with your heating in Portland, OR.

Continue Reading

What to Look for in a Heating Repair Service

January 10th, 2014

In today’s information-saturated world, you only need to type the words “heating repair” into a search engine, or speak them into your smart phone to get a long list of potential contractors for hire. How do you navigate through the oceans of choices—especially when you know that many of the companies are probably inexperienced or they don’t offer the services you need?

Here are some criteria that we think is crucial for any heating repair service worth hiring. We think that after you consider these points, you’ll discover that Clean Air Act is one of your best picks for heating repair service in Portland, OR.

A few things to look for in a heating repair contractor:

  • 24-hour emergency service – Breakdowns and serious repair needs do not stick to a convenient timetable, and a heating repair service should be ready to help you out at unusual times, around the clock and around the calendar.
  • A variety of heating services – Check to see if the repair service you are interested in works on variety of heating systems: furnaces, heat pumps, geothermal, ductless, high velocity, etc. Repair technicians with a wide range of knowledge will not only perform better repairs, they will also be helpful when it is time for a replacement heater.
  • Duct cleaning – Proper heating for a home involves more than the heater unit itself. Most heaters use ductwork to distribute warmed air, and ducts contaminated with dust, dirt, and debris can not only damage your heater, it can reduce its effectiveness by as much as 30%. A good heating service will also offer duct cleaning so you will get the most from your heater and only need to deal with one contractor.
  • Maintenance program – The best way to care for your heater so you will need fewer repairs in the future is to enroll in a regular maintenance program. Look for a heating service that offers different maintenance programs that will fit your budget.

Contact Clean Air Act

If you want high quality heating repair in Portland, OR, then you won’t need to search far: Clean Air Act is here to serve you, 24 hours a day. We offer a three-tiered maintenance program, perform thorough duct cleaning, and work on numerous types of heating systems. Call us today to get started with the heating repair that will keep you satisfied all through the winter.

Continue Reading

New Year’s Traditions Explained

December 31st, 2013

2014 is almost upon us, and with the coming of the New Year, we thought we’d take a brief look at some of the more popular traditions associated with this holiday. It’s been around for at least 4,000 years: as long as we’ve figured out how long it takes for the seasons to come and go. Here’s a quick discussion about some of our more modern traditions and where they started:

  • Auld Lang Syne. The famous song began in Scotland, where it was published by Robert Burns in 1796.  He claims he initially heard it sung by an elderly resident of his hometown, which suggests it has traditional folk origins even before that. It became even more popular when big band leader, Guy Lombardo, started playing it every New Year’s Eve, starting in 1929 at the Roosevelt Hotel in New York City.
  • The Dropping of the Ball in Times Square. The tradition of dropping the ball in Times Square started in 1907. It was made out of iron and wood with light bulbs located on the surface, and the ball originally “dropped” over the offices of the New York Times at One Times Square. Dick Clark famously broadcast the event every year from 1972, until his death in 2012.
  • The Rose Parade. The Tournament of Roses Parade has been held in Pasadena every year since 1890; taking advantage of California’s warm weather to present a parade of floats, bands and horses. A football game was eventually added to the festivities in 1902, when Michigan dominated Stanford’s team by a score of 49-0
  • Baby New Year. The use of a baby to signify the New Year dates back to Ancient Greece, where it symbolized the rebirth of Dionysus (the God of wine and parties). Early Christians initially resisted the pagan elements of the story, but soon came to adopt it since it matched the traditional Christmas symbol of baby Jesus in the manger. Today, people of all faiths and traditions refer to the New Year as a baby, representing new beginnings.

Whatever traditions you choose to celebrate, we here at The Clean Air Act Inc. wish you the very safest and happiest of New Years. May 2014 bring you nothing but the best!

Continue Reading

Longer Days Ahead: Why Winter Solstice Is a Reason to Celebrate

December 23rd, 2013

Holiday greetings from all of us at The Clean Air Act!

December is a time of celebrations across the globe, despite the cold weather that affects much of the countries in the Northern Hemisphere. In fact, the cold weather is one of the reasons that it is so important for people to embrace celebrations of light, color, food, and warm drinks—what better way to cheer up during a time of short days and low temperatures?

There is another reason to feel joy at the end of December, regardless of your religion or culture: an astronomical event called winter solstice.

Four astronomical markers divide the seasons on planet Earth: two solstices and two equinoxes. Equinox (a combination of the Latin words for “equal” and for “night”) is the point in Earth’s orbit when its axis is parallel to the Sun. Solstice (from the Latin words for “sun” and “to stand still”) is the point in orbit where the Earth’s axial tilt points toward the Sun. During the equinoxes, which occur at the start of spring (vernal equinox) and fall (autumnal equinox), the periods of day and night are the same length. During the solstices, which occur at the start of summer (June solstice) and winter (winter solstice), either day or night is at its longest period. June solstice is the longest day of the year; winter Solstice is the shortest day of the year.

Occurring on the 20th or the 21st of the month (this year it falls on the 21st), winter solstice marks the official beginning of winter, but also the point at which the days start to grow longer once more. The sun, which has dropped lower in the sky since the June solstice (June 20-21) and reaches its lowest point above the horizon on noon on winter solstice, once again begins to rise.

From the earliest human prehistory, people have recognized the winter solstice as an important event in their lives. When winter survival was difficult for early human societies, the sight of the sun beginning to rise in the sky once more was a symbol of hope and a reason to celebrate.

(All of the above applies to the Northern Hemisphere of Earth. The equinoxes and solstices flip in the Southern Hemisphere. For example, in Australia, Christmas is a summer holiday.)

However you commemorate and observe this time of year, we hope you and your family have a joyful and safe season!

Continue Reading

Air Handler Problems We Often See

December 18th, 2013

Forced-air heating is a common way to provide warmth for a house. If you have a heat pump or a furnace installed, it uses the distribution of heated air through ductwork and out vents to deliver you the temperature necessary to enjoy a comfortable winter season in Oregon.

A key component of forced-air systems is the air handler, which is responsible for the movement of air through the ducts. Air handlers are different from system to system—a furnace air handler isn’t like a heat pump air handler—so repair work requires technicians with extensive and broad training. When you need that kind of professional heating repair service in Portland, OR, the people to turn to are the experts at Clean Air Act.

A few common air handlers issues

  • Air filter clogs: The most frequent trouble to afflict air handler comes from the filter designed to protect the interior of the heating system. The air filter must be changed regularly (we recommend once a month during the height of the heating season) or the amount of dirt and debris trapped in it will begin to restrict air flow—and worse, damage the filter so the debris infiltrates it and harms the inside of the air handler.
  • Burnt-out motors: Motors are responsible for running the air handler fan. If left without regular maintenance and cleaning, or if a large amount of dust enters the handler, the motors will strain to work and eventually burn out. Dusty motor bearings are one of the most common reasons for motors running down. If an air handler motor burns out, a professional will need to replace it.
  • Damaged fan belts: The most exposed section of the air handler, and the one most susceptible to damage, is the blower motor fan belt. It operates similar to the fan belt in a car engine, although you shouldn’t attempt to replace an air handler belt just because you know how to change a car engine belt: the job requires specific skills. If the fan belt becomes cracked or comes loose entirely, it will threaten to damage other components inside the air handler, so the belt needs to be replaced as soon as you discover something is wrong. (Usually a violent clacking sound.)

If the air handler in your furnace or air pump breaks down, it won’t matter how effectively the rest of the system runs: you will have zero airflow from the vents, and therefore zero heating. Call for professional repairs before the problem grows too large. You should also enroll in routine maintenance with a trusted HVAC company so you will catch air handler problems early and keep your system clean and functioning its best.

You can reach Clean Air Act 24 hours a day when you need heating repair in Portland, OR. Look into our maintenance program to help take good care of your air handler and all parts of your heating system.

Continue Reading

3 Reasons You Shouldn’t Attempt to Install Your Own Heater

December 10th, 2013

If the time has come to replace your decrepit old heater, or if you’ve just built a new home, you’ve probably thought to yourself at least once, “Why can’t I save some money and handle the installation myself?”

We hope you quickly discarded this thought. But if it’s still knocking around in your brain, we’ll give you 3 very good reasons why you should entrust this large undertaking to a professional, experienced company. Once you see that you should go to the experts, we hope you will choose Clean Air Act for your Portland, OR heating installation.

1. It may be illegal

This depends on local codes and the type of heater you plan to install. However, in many jurisdictions, laws prevent anyone without a permit from installing or repairing a gas-powered appliance that connects to a municipal supply line, or that connects to any sort of exhaust system. You can check local laws to make sure… but the better route is simply to entrust the job to someone who does have a permit: a professional installer.

2. It may be dangerous

There are some good reasons why city and state laws often prohibit homeowners without licenses and permits from doing their own installations. The main one is that unskilled work on a heating system presents major health hazards. Work with natural gas lines can lead to leaks that expose people to toxic fumes and the risk of explosions; electrical heaters carry the danger of high voltage shocks. Even if you manage to install a heater without injuring yourself, you won’t know if the heater is running safely: a gas-powered heater could slowly leak carbon monoxide, and an electric heater could be a potential fire hazard because of faulty wiring.

3. It will need further repairs

It’s almost guaranteed that if you try to perform an installation without any professional assistance, you will not get the job done effectively. Although the heater may appear to run adequately, it will soon start to malfunction and require repairs. The money you “saved” by going solo will end up spent on numerous repairs to keep the system running. Eventually, you will need to scrap the whole heater earlier than you would have if you relied on professional installation from the beginning.

We understand that homeowners like to feel self-sufficient and want to find ways to save money. But a complex home heating system is not a place where you should cut corners or experiment with your toolkits. Too much rides on this system working properly. Stay safe and warm—and legal—by calling in an expert HVAC company for your Portland, OR heating installation.

Clean Air Act offers comprehensive installation on many different kinds of heating systems. Contact us today to get started with a superb installation for your home.

Continue Reading

How to Heat Your Home Cleanly and Efficiently

December 2nd, 2013

Two major concerns that homeowners face today when it comes to providing their houses with warmth during the winter: how to save money, and how to have improved indoor air quality. Nobody wishes to waste money unnecessarily, and with the high cost of heating, homeowners want to find ways to cut back on those expenses. And indoor air quality is now a major health concern in the U.S., where people spend 85% of their time inside.

It isn’t difficult to find ways to heat your home efficiently and cleanly. If you turn to a quality heating service, you will find there are many methods toward achieving safe and energy-saving warmth.

Here are some ideas from Clean Air Act to improve your heating in Portland. Contact us for more information or for professional heating service in Portland, OR, including installation, maintenance, and repairs.

Maintain an energy-saving thermostat level

You might not know it, but you may have your thermostat set at a temperature that is draining power without giving you any better comfort. A recommended indoor temperature for winter during the day time is 68°F; most people will find this comfort enough with the addition of an extra layer of clothes. At night, lower the temperature to 58°F. These changes can mean savings of nearly 20% off your bill annually.

Install air cleaners

A mechanical filter or an electronic air filter can remove allergens and contaminants from your home. HEPA filters are among the best: they remove up to 99.9% of all contaminants. Electronic air cleaners ionize the air to separate smaller particles.

Go with a ductless heating system

If you are thinking of installing a new heating system, consider having a ductless mini split heat pump put in. Without ductwork, you won’t have to worry about pressure loss, inefficiency from duct breaks, or dust and dirt contamination.

Schedule regular maintenance

The best way of all to make sure your heater keeps your air clean and your budget protected is to have an HVAC technician give it an annual check-up, cleaning, and tune-up. You’ll have a heater running at its best and cleanest after each yearly visit. This will also mean fewer repair emergencies in the future.

Clean Air Act offers a three-tiered maintenance program to fit your budget needs. We install many different air filters and electronic cleaners, and also install ductless mini split systems. We are your one-stop Portland, OR heating service company when you want more efficient and cleaner performance from your heater.

Continue Reading

Thanksgiving, 2013: The Presidential Turkey Pardon

November 25th, 2013

Thanksgiving began in 1621, but didn’t become a national holiday until 1863, when Abraham Lincoln declared it in hopes of bringing a divided nation together. We have many Thanksgiving traditions in this country, from turkey at the meal to the annual Cowboys and Lions games on television. But one of the most beloved is the annual Presidential turkey pardon, in which the U.S. President “pardons” a turkey to life in a petting zoo rather than ending up as someone’s main course. As we celebrate this Thanksgiving, we thought you’d like to know a little more about the history of this fascinating tradition.

Farmers have sent turkeys to the White House as far back as the 1800s, hoping to have the honor of providing the President’s annual meal. There have been scattered stories of individual turkeys being “pardoned” throughout that time, including one in which President Lincoln’s son Tad successfully convinced the president to spare a bird intended for the family’s Christmas dinner.

Starting in 1947, the National Turkey Federation became the official supplier of the President’s Thanksgiving birds. The White House arranged for an annual photo op that year with the President receiving the turkey in the Rose Garden. Sadly, there was no pardon as yet; those birds all ended up on the Presidential table.

The push for an official pardon picked up steam in 1963, when President Kennedy ask that the bird be spared just a few days before his assassination. President Nixon opted to send each of the birds he received to a nearby petting zoo after the photo op, though there was no formal pardon attached.

But it wasn’t until 1989 that the pardon became official. On November 14 of that year, President George H. W. Bush made the announcement, and sent the bird to a Virginia game preserve to live the rest of its life out in cranberry-and-stuffing-free bliss. Since then, every President has held an annual pardoning ceremony, with the lucky turkey spared the axe and sent off to live in peace. Since 2005, the pardoned birds have gone to Disneyland in Anaheim, California where they have lived as part of a petting zoo exhibit in Frontierland.

No matter what traditions you enjoy this holiday, or who you enjoy them with, all of us here wish you a peaceful and happy Thanksgiving weekend.

Continue Reading