Why Should I Clean My Air Ducts?

October 24th, 2011

Everyone in Hillsboro knows it’s important to keep your home’s air ducts clean, but why? Many people ask that question, and it’s important to understand why you are doing such a chore so that it has a purpose.

Actually, there is no one reason why your air ducts need to be kept clean—there are several, all of which are connected to one another. Here are five of them for you to consider:

  • Efficiency – Clean air ducts allow the air to flow through much easier and more readily, so your furnace, air conditioner or heat pump won’t have to work as hard to ventilate the house. This makes for more efficient operation and lower energy consumption.
  • Performance – When your HVAC system does not have to work as hard to push air through the ductwork, it will perform better. Your home will be more comfortable and better ventilated.
  • Longevity – Because your HVAC system is operating more efficiently, it will be able to perform at a high level for a longer period of time. Well-maintained systems last longer than those that are not taken care of, and cleaning the ducts is part of good HVAC maintenance.
  • Savings – Clean ducts can save you a lot of money over time. Your energy bills will be lower because of how efficiently the whole system is running. You will spend less on maintenance and repair costs, because the system is being well-maintained. And, as an added bonus, your ducts will last longer because of the decreased risk of corrosion and damage from being dirty.
  • Health – Last, but certainly not least, clean air ducts mean clean air, which is important for your health and your family’s health. Especially if you have pets, if you smoke or live with a smoker, or if anyone in the house has allergies or asthma, cleaning your air ducts is a must. You could even include the decreased frequency of doctor visits under the savings mentioned above!

Clean air ducts go a long way toward making your home a pleasant place to live, as well as making home ownerships as worry-free as possible. Yes, it entails some extra work and/or expense, but in the end the benefits far outweigh the cost.

Continue Reading

Did You Change that Furnace Filter?

October 21st, 2011

No matter what type of furnace you have in your Cornelius home, it’s important to remember to change or clean the filter on a regular basis. This is a relatively straightforward process and doesn’t require any professional help. However, if you’re not sure how to go about doing it, you can always have your heating technician demonstrate the process for you on their next regular maintenance visit.

Indeed, changing or cleaning out the furnace filter is an important part of regular furnace maintenance. However, it often needs to be done more than once a year. The specific amount of time that you can go between filter changes depends on many things, but typically it’s good to check on it once every three months or so.

If you have a lot of pets or if anyone in your family has severe allergies, it may be worth it to check and change the filter even more often. Check with the manufacturer to see what their recommendations are as well. Some high performance furnace filters can last up to six months or even a year, but you should still check on the filter periodically to make sure that too much hasn’t built up on it in between replacements or cleanings.

You’ll need to make sure you have the right type of filter to install as a replacement as well. You can get this information from the owner’s manual of your furnace, from the manufacturer or by taking out and examining the current filter in your furnace. Some furnaces also have filters that are meant to be cleaned and then put back in and the cleaning instructions are usually located near the filter itself.

Of course, in order to change your filter you’ll first have to be able to find it. Most of the time, the filter will be located near the blower towards the bottom of the furnace. However, if you’re not having much luck finding it, your owner’s manual should be able to tell you quickly where it is and how to remove it. Before you go to open the chamber and take the filter out, however, be sure you’ve turned off the power to the furnace.

Changing your furnace filter can help improve the air quality in your home and it is also very important when it comes to keeping your furnace running efficiently and effectively. The filters are there to trap airborne particles that can get into the blower and clog it up. When that happens, the performance of your furnace will likely drop and you’ll need to have a professional come out and complete the necessary repairs.

Continue Reading

What kind of noise can I expect my heat pump to make?

October 19th, 2011

Whenever you’re looking into replacing your old home heating system or installing a new one in Canby, there are many different factors you’ll have to take into consideration. The amount of noise that the system you choose will make is certainly one of these. And in addition to the amount of noise that this system will make, you’ll also want to make a note of where the unit will be placed and so where the noise will be coming from.

While you may have had to worry a bit about the noise generated by heat pumps in the past, it’s not something you’ll have to take into consideration this time around. That’s because newer heat pumps are designed to be quieter than ever, providing the same heating and cooling power with only a fraction of the noise of some earlier models.

In fact, the only part of a heat pump that really makes any noise at all is the outdoor unit. Unless this needs to be located very close to your home or to a window of a room that you use often, chances are that you won’t even hear it at all.

However, if you live very close to your neighbors or don’t have a lot of outdoor space, you may have to put the outdoor unit close to the walls of your home. Even then, though, you’ll hardly notice the noise your heat pump makes. Years of research and redesigning have produced some of the quietest heat pumps yet and that’s what you’ll be buying if you’re in the market for one of these systems now.

Newer heat pumps have been tweaked and adjusted to minimize the amount of noise-generating vibrations they produce. In fact, you’ll probably find that most of these units make no more noise than your refrigerator. They’re efficient and quiet and can keep your home comfortable all year long.

Continue Reading

How Efficient are Heat Pumps for AC and heating?

October 17th, 2011

Heat pumps are actually remarkably efficient when compared to some of the home heating alternatives out there in Portland. Especially if you’re already using electricity to heat your home, you can get generate huge savings on your monthly energy bills by switching to a heat pump system.

As their name suggests, heat pumps remove heat from the air and transfer that heat from one area to another. That means that in the winter, your heat pump will remove the heat from the air outside your home and pump that heat in to heat your home. During the summer months, that process is actually reversed, and heat pumps are able to cool your home by collecting the heat from your indoor air and pumping it outside.

Since heat pumps are actually just moving heat from one place to another rather than generating it all on their own, they don’t require much energy at all to operate. While you can buy furnaces that are as much as 97% energy efficient, they’re still using more energy than a heat pump would. The fact that the furnace is turning the vast majority of the energy that it uses into heat doesn’t mean that it still doesn’t require more energy to operate.

Just because heat pumps are more efficient than many other types of heating systems, you can’t just assume that all heat pumps are equally energy efficient. Just as different types and models of furnaces have different energy efficiency ratings, so too do the many types, sizes and models of heat pumps. Make sure you thoroughly compare your options before you settle on the right system for your home.

The energy efficiency rating of a furnace is easy to recognize, as each of them comes with a standard AFUE rating. If you’re looking to switch to heat pumps, however, it’s easy to get confused when you’re trying to compare the energy efficiency of various models.

Heat pumps actually have two separate measurements for energy efficiency. These are the seasonal energy efficiency ratio (SEER) and the heating seasonal performance factor (HSPF). Energy efficiency measurements for heat pumps reflect both the cooling and heating efficiency of the system, and so what’s best for you may vary depending on what you’re more likely to use your heat pump for. If you have any questions, contact your local contractor.

Continue Reading

Common Furnace Problems

October 14th, 2011

When it comes to your Colton home’s furnace, you simply want it to work all of the time. But just like any other piece of equipment, your furnace will have problems from time to time. A few of these are relatively simple to fix on your own, but for the most part you’ll need to call in someone to take care of the repairs for you.

However, before you can do that, you’ll need to recognize that a problem exists at all. And the earlier you notice the warning signs, the better off you’ll be. It’s always better to get a furnace problem taken care of right away than to wait until your furnace stops working completely.

It’s also good to remember that quite often the problems you’re having with your furnace are really originating with your thermostat. This is usually welcome news, as thermostats are much cheaper and easier to repair and replace than many other parts of your furnace. In fact, even if your furnace isn’t working at all, it may only be the result of a faulty thermostat.

Another problem you may start to notice is that one part of your house is being warmed more than another part. When this happens, it can be a sign that there is something wrong with the furnace, but it may also be that the pressure in your duct system is not balanced properly. A simple rebalancing of this system can have your house heating evenly again in no time.

You may also realize that your furnace seems to be cycling on and off too often. When a furnace is working properly, it will come on for a considerable period of time and then shut off until the temperature in the house drops below the desired level. However, some problems can cause your furnace to complete many short cycles rather than fewer short ones.

If this is happening to your furnace, there are several possible causes. Something might be wrong with the blower on the furnace or the thermostat might not be feeding the furnace the correct information. Another possibility is that your furnace’s air filter is dirty or clogged.

While there are sometimes simple and straightforward solutions to these types of common furnace problems, it’s best to call in a professional to have them take a look if you’re not sure where to start searching for a problem. In most cases you’ll need them to come out and make the necessary repairs anyway.

Continue Reading

What Is a Downflow vs. an Upflow Furnace?

October 12th, 2011

When you go looking to buy a furnace in Clackamas, you may well be surprised by how many different elements go into making a good purchasing decision. There are simply so many different kinds of furnaces available now and they each are more appropriate for certain situations. That means that finding the one that’s right for you is less about finding the one best unit than it is about finding the one that is the best match for your particular circumstances.

This applies to the type of fuel the furnace uses, its energy efficiency, and whether it’s an upflow furnace or a downflow furnace. Energy efficiency and fuel types are probably things that you’re more or less familiar with. But what are we talking about when we classify a furnace as an upflow or downflow model?

Well, it’s pretty much what it sounds like. These terms refer to the direction the air flows as it is taken in and heated by the furnace. So in an upflow furnace, the cool air is taken in at the bottom, warmed, and then expelled at the top. A downflow furnace, on the other hand, takes in cool air at the top and expels heated air at the bottom.

While this is all very exciting, it may still not be obvious what impact this will have on your decision about what type of furnace to buy. The main thing you’ll have to think about when you’re deciding between an upflow and a downflow furnace is where the furnace will be placed in your house.

An upflow furnace is generally installed in the basement so that the heated air is directed towards the parts of the house you want cooled and so that the furnace can be appropriately vented outside of the house. On the other hand, a downflow furnace would be installed in your attic for the same reasons.

So where you want to have the furnace installed is probably the biggest thing to take into account as you’re comparing these two types of equipment. Of course, whether you pick an upflow or a downflow furnace, you’ll still have to select the appropriate AFUE, size and fuel source to best meet your needs. But making the choice between upflow and downflow can at least make it easier to narrow down your options.

Continue Reading

Furnaces vs. Heat Pumps

October 10th, 2011

If you’re preparing to replace your existing heating system in Cornelius, you may very well be struggling with the question of whether to go with a furnace or a heat pump for all of your future home heating needs. Each of these systems have their own advantages and drawbacks, and once you’ve narrowed it down to one type or the other, you’ll still have a pretty wide variety of products to choose from.

Furnaces are still the most popular type of home heating equipment on the market. You can get furnaces that run on gas, oil or electricity, although gas furnaces are by far the most common type of furnace around these days. The latest models are extremely energy efficient, with AFUE ratings reaching into the high 90%s.

Like heat pumps, furnaces use ducts to transfer heated air throughout your home. They typically require regular maintenance once every year or two depending on the type of furnace you have, and they can be expected to last anywhere from 15 to 25 years when properly maintained. Most modern furnaces are also made to be compatible with a central air conditioning or cooling system as well.

Heat pumps, on the other hand, don’t generate the heat that they circulate throughout your house. Instead they are able to extract the heat from the air outside and pump it inside. This means that they use much less energy than even the most energy efficient furnaces.

However, heat pumps are only capable of heating your house comfortably when the outside temperature is above freezing. If you live in an area with particularly long and frigid winters, you’ll probably find that you need to supplement your heat pump with another heat source. Because of this, it actually makes little sense to use a heat pump in more extreme climates.

On the other hand, if you live in an area with relatively mild winters, heat pumps can be a great option. They provide a constant flow of warm air to all parts of your home and can also keep you house cool during hot summer months. To cool your home, heat pumps simply reverse the process they use to warm it. They take the heat out of your indoor air and pump it outside. This is a very effective home cooling method and makes heat pumps a great solution for year round comfort.

Continue Reading

How Much Will a High Efficiency Furnace Save Me?

October 7th, 2011

The furnaces you can buy these days in Woodburn are all much more energy efficient than those available even 10 years ago. However, that doesn’t mean that all of the current models are created equal. There is still a pretty big variation when it comes to energy efficiency and when it comes to price, so you need to really know what you’re looking for if you want to get the best deal out there.

The first thing you should understand when you’re trying to pick out a furnace is how energy efficiency for this type of equipment it measured. All furnaces come with an annual fuel utilization efficiency (AFUE) rating that reflects just exactly how energy efficient they are.

Any furnace you buy today will have an AFUE of at least 80%, but it’s possible to purchase models with AFUEs of 97% or more. Of course, energy efficiency is generally a good thing, but there are some other things to consider when you’re trying to decide just how energy efficient you need your new furnace to be.

What this calculation really comes down to is how much you’ll be able to save monthly and annually with a higher efficiency furnace. While your heating bills will certainly be lower the higher the furnace’s efficiency is, you will also pay more up front for the highest efficiency models.

This higher purchase price may be worth it, however, if you live in an area with particularly harsh winters. If your heating load is very high and you’ll be using your furnace a lot, your monthly savings will make up for the higher initial price of the high efficiency furnace in a reasonable amount of time.

However, if you live in an area with relatively mild winters and you won’t be demanding a whole lot of your furnace, then the amount you’ll save each month with the highest efficiency models really won’t add up to much.

Keep in mind that a furnace with an 80% AFUE is still quite efficient and will almost certainly save you a considerable amount monthly when compared to the unit you’re currently using.

Continue Reading

How to Maximize Savings in Your Home

October 5th, 2011

When you are thinking about different ways you might be able to save money around your Welches house, the tendency is to think big. Maybe you need to upgrade to a more energy efficient furnace, or it could be time to install a new central air conditioning system. Maybe it is even a good idea to switch to solar or geothermal power.

But before you do any of that, you may want to try some quick and easy ways to save money around the house with the equipment you already have. Here are 8 great ways to cut your power usage and keep those energy bills down without investing a lot in new equipment.

  1. Seal Up Your House – No matter how energy efficient the heating and cooling systems are in your house, you will be using more energy than necessary if your house is not tightly sealed. Make sure there are not cracks or places where drafts can get in and you will start saving money right away.
  2. The Right Thermostat Setting – Are you really going to notice the difference between 72°F and 69°F? Probably not, but you will save about 3% off of your monthly heating bill for every degree you turn the thermostat down. The same goes in the summer too, just backwards.
  3. Programmable Thermostats – And while we are on the subject of thermostats, it is a good idea to invest in a new one with programmable settings. That way you will be able to set your house to be warm when you will be there and you do not have to pay to keep it warm all day long if it is empty.
  4. Ceiling Fans – Ceiling fans can help keep you cooler in the summer and warmer in the winter. Plus, they cost very little to run so they are a great investment.
  5. Light Bulbs – Switching to energy efficient fluorescent bulbs all over your house will save you a ton even though they cost a bit more to begin with.
  6. Lights Out – But energy efficient bulbs will only get you so far. You should also be sure to turn off the lights in any room you are not using.
  7. Power Strips – Many home appliances draw a small amount of power even when they are not turned on. Use a power strip to easily cut the power to them completely and eliminate that drain.
  8. Sealing Windows – Plenty of air can come and go through your windows as well. Upgrading to more energy efficient windows is certainly an option, but you can also help to seal up your home inexpensively by covering your windows with plastic.

Continue Reading

Help your system last longer by scheduling regular maintenance

October 3rd, 2011

While every new furnace sold comes with a limited 10 year warranty for the unit and parts, it is a good idea to supplement your warranty with a more complete maintenance agreement with your Molalla HVAC provider. Why pay for a secondary maintenance plan when you already have a warranty?

For the most part, the limited warranty provided by the manufacturer is meant to cover things like faulty parts, abnormal breakdowns or recalls. If your system simply needs to get a checkup because you use it a lot or there is a clog that isn’t caused by the actual furnace or air conditioner, you will likely end up paying the maintenance cost. So, by paying for an upgraded service plan, you cover all potential breakdowns and you’ll never again need to worry about your system. It’s like getting the upgraded warranty for a new car that covers everything from a busted crankshaft to old windshield wipers.

Help Your System Last Longer

Another benefit of a maintenance agreement for your HVAC system is that the system lasts longer when it is regularly maintained. This will ensure your HVAC system lasts significantly longer than if you were forced to wait until you could afford an extra visit from your repair man.

So, not only do you ensure your system keeps working, you add a lot of valuable years to its lifespan. Imagine how much money you’ll save if your furnace or air conditioner lasts for much longer than advertised. Any breakdowns after the 10 year mark would require hefty repairs or replacement since your warranty is expired. So, it’s in your best interest to keep your system running smoothly throughout its lifespan.

Ultimately, an HVAC system is only as good as what you put into it. If you’re careful about your investments and are willing to spend a little extra now, you’ll stand to benefit far more in the future from a smoothly operating, efficient heating system.

Continue Reading