One of the most important questions to answer when purchasing and installing any new heating or cooling system, no matter what type, is what size is best for your Sherwood home. You need something that has enough capacity to heat or cool your whole home comfortably; otherwise your house will consistently be at an undesirable temperature.
Some people might think that the quickest solution to this problem is to just buy a system that they are sure has a capacity larger than the size of their home. You may even be tempted to get the biggest model out there, under the logic that the biggest is the best and it will be sure to be able to cover your whole house.
While this line of thinking might make sense to you, it’s actually not a good idea. The problem with this “solution” is that you can wind up with a heat pump that is considerably too large for your needs, which means your home will consistently be either too cool or too hot, and your energy bills will be unnecessarily high.
The best way to choose a new heat pump is to have a professional do a load calculation in your home. This can be a highly technical process, so it is best to leave it to the pros. However, here are some quick tips and other things to consider on the subject:
- There are a lot of variable to consider in doing a calculation like this. A contractor doing a load calculation will consider the type of construction, what kind of insulation you have installed, what kind of windows you have, whether there is an attic, how many people live there and many more factors.
- It never hurts to shop around. Get a few estimates from different area contractors, rather than just going with the first opinion.
- Also, since heat pumps are used for both heating and cooling, different contractors may opt to do the calculation in different ways. Some will estimate capacity based on heating, while others will base it on cooling. Ask to see which is the case for each estimate you receive.
- If you are getting a new heat pump as a replacement for an existing one, or even a different heating/cooling system, check the capacity of the unit you are replacing. That can be a good place to start. You will at least be in the right ballpark.
All of this means doing some extra leg work up front, but getting the proper sized heat pump is well worth the effort.