The Clean Air Act Blog: Posts Tagged ‘Beavercreek’

Take Care of Your Heating Repairs Before the Cold Hits

Monday, October 14th, 2013

In Beavercreek, OR, heating issues take center stage during the winter months when temperatures are coldest. We don’t think about heating much during the summer or fall, which can actually be a mistake. Indeed, the early fall makes an ideal time to take care of heating repairs, whether you have something significant that needs fixing or you just want to do a little maintenance. Here’s why you should take care of your heating repairs before the cold hits.

The most important answer is the most obvious. You don’t want your heater to be out of commission in the depths of winter. You never know when the next storm or cold front is going to move through, which can put a great deal of pressure on you to get the repair done quickly. In the fall, when temperatures are warmer, the need for the heater is not as dire, and you’ll have more time to plan and accommodate a repair session. Furthermore, most service technicians are less busy during the fall than they are during the winter, when heating malfunctions are more common and require speedier solutions.

Then there’s the question of our warm summers, which means your heater has likely sat unused for several months. That means it’s built up dust and debris, and lingering issues from last heating season have not gotten better on their own. The fall is the perfect opportunity to schedule a maintenance session to clean the accrued dust, or to note areas where the idle heater could use a repair.

The benefits of taking care of your heating repairs before the cold hits are obvious. It leaves your heater in optimum shape when winter sets in, reducing the risk of further repairs just when the unit is needed the most. It also ensures that your heater is functioning at peak capacity, reducing inefficiency and saving you money on your monthly bills. If you live in Beavercreek, OR, heating issues can be resolved by the heating repair professionals at Clean Air Act. Call us today to schedule repair service in Beavercreek, OR.

Continue Reading

Tags: ,
Posted in Heating | Comments Off on Take Care of Your Heating Repairs Before the Cold Hits

Why a Ductless Mini Split Air Conditioning Might be Right for Your Home

Friday, August 9th, 2013

Are you tired of conventional HVAC systems that use ductwork to circulate air throughout your home? Are you looking for something more energy efficient and versatile? Few innovations in the HVAC industry have been so momentous as the development and ensuing popularity of the ductless mini split system. Such systems allow homeowners like yourself a flexible, energy-efficient, and effective cooling experience. But many homeowners are still wondering about ductless mini splits: how do they work, and are they right for me? It’s hard to tell without a professional consultation, but we can offer some reasons why it might be worth your time to consider having one installed in your home. Call Clean Air Act for comprehensive Beavercreek, OR air conditioning services, whatever your need may be.

  • What is a ductless mini split air conditioner? It has a funny name, to start. A ductless mini split system is a “split” system just like central air, which means it has a rather conventional outdoor compressor/condenser and an indoor evaporator/air handler. The “mini” term refers to the relatively compact size of the indoor unit, which, unlike the large steel housing of a conventional AC, sits high on the wall or recessed in the ceiling. These indoor units are nearly silent. The “ductless” refers, of course, to the absence of ducts. Instead, the drainage, electrical, and refrigerant lines that run from the outdoor to the indoor unit function as the refrigerant cycle.
  • How does it work? A ductless mini split air conditioner works like any refrigeration device. The circulation of refrigerant through a compressor allows the chemical to absorb heat from one area and transport it elsewhere. The chief difference lies in that the indoor unit sits directly in the living space, and thus does much of its work for that respective zone. That is why ductless mini split air conditioners often require multiple indoor air handlers for every single outdoor unit. The benefit of this layout is that the system has built-in zone control, which can help you cool only those parts of your living space that you need to at any given moment.

A ductless mini split air conditioning system makes a great choice if you want to save money on energy consumption in the long-term and want to take greater control of how the cool air flows throughout your home. Call Clean Air Act today for all of your air conditioning needs in Beavercreek, OH.

 

Continue Reading

Tags: ,
Posted in Air Conditioning | Comments Off on Why a Ductless Mini Split Air Conditioning Might be Right for Your Home

How Do I know if I need a Dehumidifier or Humidifier?

Monday, November 12th, 2012

Humidity is a critical factor in your home in Beavercreek. Most people know that the winter is dry while the summer tends to be more humid. While there are many humidity control products available on the market, few people know how to tell if they need more or less humidity in their home. Here at Clean Air Act, we thought it would be helpful for the community in Beavercreek if we put together a quick checklist so you can know if you need more or less moisture in your home.

Why is Humidity So Important

Humidity in your Beavercreek homes plays a large part in how comfortable you are there. Humidity can impact your health as well as the quality of the air inside your home. For example, when your home is too humid, dust mites and mold can thrive. If the air is too dry, it can also cause your wood furniture to dry out and crack.

Too Little Humidity

There are a number of indications that you might have too little moisture in your air.

  • If you start to notice that your lips or hands are drying out, this probably means that the humidity in your home is too low. You may also notice that your throat and nasal passages are dry as well. This could result in a cough or a bloody nose.
  • The increase of static electricity in your home is more evidence of low humidity. If this is the case, you’ll notice that you get shocked when you walk across your home or that your clothing sticks to you.

Too Much Humidity

Here are a few indicators that you have too much humidity in your home.

  • Too much moisture can make your home feel stuffy and uncomfortable.
  • If you notice an increase in mold growth around your home, that can also mean you have too much moisture in your air.

Hydrometer

If you really want to be sure if your air is too dry or too moist, a hydrometer can be useful. Hydrometers, as you can probably guess, measure how much water is in the air as a percentage. On rainy days, a properly calibrated hydrometer would indicate a 90% humidity level.

If you would like more information about humidity control systems for your home in Beavercreek, then call the experts at Clean Air Act. We can help you measure the current humidity levels in your home and let you know if a humidity control product is right for you.

Continue Reading

Tags: , , ,
Posted in Indoor Air Quality | Comments Off on How Do I know if I need a Dehumidifier or Humidifier?

Benefits of a High Velocity Heating System

Monday, October 22nd, 2012

If you are considering a high velocity heating system for your home or business, call the Portland heating experts at The Clean Air Act. We can go over the benefits and your options no matter what your heating needs are. For upgrades, we can also send a technician to your home or office to determine which type of heating system is right for you. Here’s how it works and the basic benefits you’ll get.

High velocity systems are also called small duct velocity. They are an energy-efficient air delivery system to meet all your HVAC needs, including heating, air conditioning, ventilation, air filtration, and moisture control. This improves indoor air quality and provides heating and cooling in one efficient system. Similar to installing ductless split systems, there’s very little disruption during the installation process. In other words, you don’t have to tear out all your walls due to the use of a flex duct system used to deliver the air throughout your home or office building.

The other main components can fit into closets, mechanical rooms, attics, crawlspaces, and most other tight-fit spaces. This makes high velocity systems ideal for retrofits, but they are also a good option for new construction projects. These systems are quiet and provide ample heat for your space even on the coldest days of the year. You can also add a whole-home dehumidifier or humidifier for better indoor air quality.

Another benefit is that high velocity systems evenly distribute the air to every room in your house evenly. However, if you are upgrading, you will need to make sure your air handler is upgraded to ensure that it is compatible with the new high velocity system. While there are many heating replacement options, you may find that a high velocity system is the most cost-effective upgrade for your needs, but it’s always good to speak with a professional contractor first.

Don’t hesitate to call the Portland heating, air conditioning, and indoor air quality experts at The Clean Air Act for all your questions about high velocity heating systems. Call today to get started!

Continue Reading

Tags: , , , , ,
Posted in Heating | Comments Off on Benefits of a High Velocity Heating System

How do I choose the right air cleaner for my home?

Monday, October 15th, 2012

At Clean Air Act, we provide a multitude of air purification systems to help improve indoor air quality in your Oregon City home. The standard filters that are installed in your heating and cooling system may not be enough if you suffer from allergies or other respiratory issues. If you aren’t sure which type of air cleaner will meet your indoor air quality needs, just give us a call to set up a consultation. Here’s some information to get you started.

Air cleaners are installed to work with your central heating and air conditioning system. Many homeowners choose either an electronic or mechanical air cleaner, since they each target different contaminants. Chronic allergy suffers choose mechanical air filters since they are more cost-effective and target the more common indoor allergens, such as pet dander, pollen, and mold spores.  Electronic air cleaners are more expensive but target smaller particles, so it is important to know what type of irritants you wish to eliminate.

Some people choose to install both types of air cleaners, in addition to a UV germicidal light to help kill bacteria and viruses. The type of air filtration system you choose really depends on your specific needs and your budget.   If you are unable to eliminate the source of the problem (people with pets, for instance), then you may one to consider one of these different combinations of air cleaners.

Keep in mind that air cleaners cannot eliminate radon or get rid of mold in the home. Mold remediation and radon mitigation should be handled by a professional. We also offer radon testing and remediation for homeowners throughout the area.

Call Clean Air Act, the Oregon City indoor air quality experts if you have questions about improving the air quality inside your home

Continue Reading

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off on How do I choose the right air cleaner for my home?

Can I Use Geothermal Heat if I Live in a Cold Climate?

Monday, June 4th, 2012

Geothermal heat pumps in Beavercreek are able to extract heat from the ground, even when outdoor temperatures are well below freezing. They use a system of pipes installed in the ground below or around your home to collect this heat and then return it to your home where it can then be used to heat the air. While these types of heating systems are certainly more efficient the warmer the ground is, they can be effective even in very cold climates.

This is true even in areas where the ground freezes from time to time or for parts of the year because the frozen layer does not typically extend more than three or four feet below the surface. As long as the pipes for your geothermal heating system are below this level, they will still be able to gather plenty of heat from the warmer ground below the frozen layer.

In fact, there are two different ways that the pipe loop for a geothermal heating system can be installed. Most geothermal systems have a horizontal pipe system which sits about four feet below the surface and extends out from the house. This type of installation is typically cheaper than the alternative, but it also usually needs to be larger. Plus, you need to have the space for it to stretch across.

On the other hand, a vertical installation goes straight down into the ground below your home. With a vertical installation, you can usually get away with less pipe overall, but you will probably pay more for the installation because it is harder to drill straight down than it is to dig out a relatively shallow trench to lay the pipe in.

However, if you live in an area that has particularly harsh winters when the ground can be frozen for significant periods of time, it may be worth it to opt for the vertical installation. That is because the further below the surface the pipes go, the farther away they will be from the frozen layer of ground.

With a vertical pipe installation, a geothermal heating system can work quite well in a climate in which the ground usually freezes in the winter. While you will always want to have a backup heating system in place in case of emergencies, this type of heat pump should be all you need under normal conditions.  Please give The Clean Air Act a call if you have anymore questions about geothermal heating and cooling.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Can I Use Geothermal Heat if I Live in a Cold Climate?

Heat Pump Air Duct Requirements

Monday, April 23rd, 2012

Between the concerns about climate change and the rising costs of energy production and consumption, there is a lot of experimentation with new heat pump replacements in Beavercreek.  Standard choices are being re-evaluated and new designs are changing the requirements for various parts.

In homes and other buildings where systems were designed and installed according to the cheaper energy parameters prevalent in the day, it may be time to consider drastic changes to increase the efficiency and decrease impact on the carbon footprint.  Room for improvement can be found in many corners.

Heat Pump Technology

Among the systems getting a fresh look are heat pumps, a device that transfers thermal energy from one location to another, usually in the direction of from a colder temperature to higher and generally the opposite of the natural flow.  While compressor-driven air conditioners and freezers are technically heat pumps, “heat pump is the term that usually implies one of the less-common devices in the class that are not dedicated to refrigeration-only.

Heat pump installations that maintain a thermally conditioned-space can be used to provide either heating or cooling, depending upon whether the environment is cooler or warmer than the conditioned-space.  Typically pumps utilize some thermal energy from the environment itself, such as the natural heat beneath the Earth’s surface.

By simply transferring the energy rather than producing it, heat pumps are being more seriously considered as attractive alternatives to provide an efficient and clean system for conditioning public and living spaces.

Change of Use

In considering a change from an existing system to a heat pump, there are many details to compare to see if it makes any sense at all.  The overall local climate (cool or hot) in general, and the availability of geothermal heat, in particular,  are two major factors.

Since a heat pump typically moves conditioned air through ductwork, the advantages of the change are much more realistic with a system of pre-existing ducts such as a forced air furnace or central air-conditioning unit.  While a heat pump often requires a larger volume of ducts, the old network of metal tunnels was often over-sized for inefficient furnaces and should do fine in a conversion to a heat pump.

The Right Data

Since the required formulas are dependent upon variables such as size, distance, volume and oomph, the design is strategic and makes all the difference.  Call Clean Air Act to speak with a trained and experienced professional.

Do the homework to get the best recommendation for your home.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Heat Pump Air Duct Requirements

Signs of an Undersized Furnace

Friday, December 16th, 2011

If you’re purchasing a new furnace for your Sherwood home, you want to avoid buying one that is undersized for your particular space. To do that, here are some common signs that the furnace isn’t powerful enough for the heating needs of your home. These signs might appear for an older furnace as well, especially as it ages and loses its ability to provide adequate heat for your home.

Maintaining Temperature

The most common (and in many cases only) sign that your furnace is undersized is that the device simply doesn’t maintain the temperature in your home properly. This means that when turned on to full and left for a few hours, your furnace doesn’t heat your home to the thermostat setting.

This can be due to an improper load calculation or a load calculation that wasn’t taken at all. The perfectly sized furnace will heat your home evenly on the coldest day your area is likely to have. So, undersizing should be pretty evident – if it doesn’t heat your home evenly and it’s not exceptionally cold outside, you might not have enough BTUs under the hood.

How to Fix the Problem

The problem is one that varies depending on the severity of the undersizing. Modern furnaces are often available with two stages, meaning they can operate at both a low BTU rating (often around 40K or so) and a higher BTU rating (70K or higher). This is the perfect solution for homeowners worried about undersizing because it ensures that your home always has enough heat in reserve should the weather get exceptionally cold.

For example, most furnaces are sized for extremely low temperatures, but if the temperature jumps up to 50 degrees F outside, your furnace is now oversized for that weather. A two stage furnace offers solutions for both common conditions and extreme conditions and will resolve most of the concern you have about undersizing and not having enough heat to offset outdoor temperatures.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Signs of an Undersized Furnace

How to Use AC Most Efficiently

Wednesday, August 10th, 2011

Air conditioning is definitely something most of us wouldn’t want to try and get through the summer without, even in Colton. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of astronomical cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative?

    Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.

  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a major expense that most of us are resigned to paying, but there’s no reason to pay more than necessary with so many strategies available to save money.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on How to Use AC Most Efficiently

Considering Remodeling? Tips To Be Sure It’s Done Right

Friday, July 8th, 2011

Remodeling your home is a great investment and can be a satisfying accomplishment once it’s done. Any remodeling project is a major one, however, and therefore requires some strategizing and careful execution in order to prevent setbacks, added expense, and a great deal of frustration. Here are some tips to help your remodeling project go smoothly, and help you keep your sanity.

Think like a Boy Scout

The best first step in any remodeling project is to prepare yourself by planning ahead. Every little bit of time and energy spent on planning and preparation can greatly reduce the amount you have to spend on tough decisions and corrections later on. Before starting your project, be sure to:

  • Hire a professional, licensed contractor to perform the work.
  • Make sure the contractor you hire is well-versed on the most recent building codes in the area.
  • Use a detailed design process to develop a plan for the room(s), choose materials and fixtures, and create a realistic budget for the project.
  • Consider staging the work ahead of time to give yourself a realistic idea of the work to be done and cut down on labor costs.

Be Creative

For most of your remodeling goals and objectives, there will usually be more than one option. By considering all your options and discussing them with your contractor, you can save money while still achieving the desired result. Some examples include:

  • Rather than repairing minor blemishes on walls by doing costly structural work, considering using materials to mask the wall, as long as it is still structurally sound. With minor imperfections, discolorations or slight damage, you can use a decorative painting technique or a heavier, textured wallpaper to cover up the area.
  • Likewise, if a room just needs to be livened up, consider repainting first before getting more involved. You may find that the new color is enough to spruce the area up.
  • Rather than creating new space by knocking down walls or building new additions, try instead to create the illusion of more space. Mirrors, skylights, and additional windows are all simple ways to make a small room seem bigger without the trouble of adding square footage.

By keeping some of these tips in mind, you can help to ensure that your house becomes the dream home you have always wanted, without the nightmares of costly or incorrect updates.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Considering Remodeling? Tips To Be Sure It’s Done Right