The Clean Air Act Blog: Posts Tagged ‘Boring’

How Does Natural Ventilation Work?

Monday, May 21st, 2012

Traditional ventilation systems in Hillsboro require the use of mechanical air handlers and fans to move air between the inside and outside of your home. However, there are alternatives that naturally pull fresh air into your home. Not only are these systems better for the environment because they use less electricity, they create a more natural flow of air that add to the comfort of your heating and air conditioning systems.

How Does Natural Ventilation Work?

There are two primary ways to employ natural ventilation in a building – either stack ventilation or wind driven ventilation. The former uses much lower pressure levels which means most buildings with natural ventilation opt for wind driven ventilation. While there are specific benefits to both systems, the best engineered systems tend to use both for a more even approach to natural ventilation.

Stack ventilation is incredibly simple. The idea is that warm air rises so when air enters a building, it heats up, both because of the people in the building and because of the indoor temperature. As the air rises and exits the building, it creates a vacuum that pulls new air in through vents placed at ground level. Simply opening windows can create this effect.

Wind driven ventilation uses the same concepts of stack ventilation but takes advantage of building design and the landscape to create pressure zones around the home. For example, the pressure on the side of a building that gets buffeted with wind will almost always be higher than the opposite side. Using ventilation based on this concept allows designers to create partial vacuums to draw new air in and expel old air.

What Is Best?

Most buildings today are built using mechanical ventilation because it can be better controlled and because it is more reliable than natural ventilation. That said, there are an increasing number of natural ventilation solutions for indoor air quality using modern technology to control the opening and closing of vents. For a small home, a system that allows you to have the natural ventilation benefits of an open window without losing all the energy you pay so dearly for is fantastic. Just be sure it will fit your specific needs by calling The Clean Air Act.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on How Does Natural Ventilation Work?

How to Install a Programmable Thermostat in your Home

Friday, February 3rd, 2012

Programmable thermostats are one of the best ways to save on heating costs, especially if you have a hard time remembering to turn down the heat in your Hubbard home. Installing a programmable thermostat will allow you to set the times you want the heat turned up or down. Not only will this make heating your home more consistent and save energy, but it will also allow you to tailor your heating needs to your schedule.

For instance, you can set the thermostat to turn on before you get up in the morning so that the house is already warm when you get out of bed, and conversely, set it to turn down after you go to bed or leave the house for work. Depending on the brand and setting options, programmable thermostats are relatively inexpensive and easy to install.

Although all styles are slightly different, here are some basic instructions that show you how easy it is to install a programmable thermostat.  Remember, this is only a general guide; always check the instructions inside the packaging of your new thermostat before you install it, or check with an electrician.

1. Remove the Old Thermostat

Before you remove the old thermostat, check to see where it’s mounted. If it’s mounted to an electrical box, the voltage used to power the old thermostat may not be compatible with the new one. Ask a certified electrician or heating technician if you aren’t sure.

CUT THE POWER TO THE HEATING SYSTEM TO AVOID ELECTRIC SHOCK. You should always turn off the main power supply to your heating system before installing any new thermostat. If you aren’t sure how to do this, ask your HVAC contractor. Once you unscrew the mounting plate for the old thermostat, just unhook the wires. Don’t throw an old mercury controlled thermostat. You should ask your local waste management facility how to properly dispose of mercury products.

2. Locate all Wires

Wrap the loose wires around a pencil to keep the wires from falling back into the wall. Identify and label each corresponding wire with a letter (do not use color coding since this is not always accurate). Strip the plastic off the ends of the wires about ¼ inch if you need to.

3. Install and Insulate Wallplate

If the area around the new wallplate is larger than the plate, insulate the hole with non-flammable insulation. Take the wallplate off the programmable thermostat and hold it against the wall to mark the screw holes with a pencil. Pull the wires through the large opening at the bottom and screw the plate to the wall.

4. Wiring

Make sure you are comfortable with wiring before you attempt to do any electrical installations. Check the manual for your programmable thermostat for instructions on wiring that specific model. In general, you’ll want to make sure you match the wire labels with the corresponding terminals on the thermostat. Sometimes there will be extra wires that aren’t needed. Always test it before completing the installation. Don’t forget the battery!

5. Install the Faceplate

Once you have it wired correctly, all you need to do is align the brackets on the faceplate with the corresponding slots on the wallplate and fasten the faceplate to the rest of the mounting. Lastly, tighten the screw at the bottom of the thermostat to hold it in place.

If you have any questions regarding programmable thermostats, give The Clean Air Act a call.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on How to Install a Programmable Thermostat in your Home

Is Geothermal Energy Renewable?

Friday, November 18th, 2011

Geothermal heating systems take heat from the ground and transfer it to your Gresham home. But how does this heat get into the ground in the first place? Conventional heating systems like furnaces use energy sources like oil or natural gas to generate heat. These energy sources are not renewable, and neither is electricity which is typically generated by burning coal or another non-renewable resource.

The renewable resources we usually think of first are solar and wind power. The sun, of course, will continue to shine and provide heat year in and year out whether we make use of it or not. Similarly, we cannot use up the wind. It will continue to blow no matter how many times it has blown before.

But what category does geothermal energy fit into exactly? Well, it is actually a renewable resource just like solar or wind energy. In fact, geothermal energy is a direct result of the sun’s heat relentlessly pounding the ground. The ground actually absorbs a considerable amount of the heat from the sun that reaches the earth every day, and that is the heat that your geothermal heating system is using to heat your home.

Of course, a geothermal heating system cannot run on geothermal energy alone. The indoor components of this heating system that keep the air flowing throughout your house must be powered by electricity. But the amount of energy needed to do this is much less than what you would need to use to run a furnace or other type of more conventional home heating system.

Over all, geothermal energy is an excellent and renewable source of energy. And once you have the heating system in place, you will need to spend very little to keep it up and running. It is an excellent option for many people, and can help to keep your home cool in the summer as well.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Is Geothermal Energy Renewable?

Indoor Air Quality Options

Friday, July 15th, 2011

Maintaining high indoor air quality is always worth investing time and money in. After all, if the air inside your home isn’t healthy, it can cause all kinds of health problems for you and your family. The state of the art home heating and cooling systems we have today make it possible to enjoy a perfectly temperature controlled indoor environment all year long, but they also trap indoor air pollutants and contaminants inside without proper ventilation.

Choosing a System that Works

Luckily there are a number of great products out there designed to remove these pollutants before they cause you and your family discomfort or illness. Before you run out to buy a new system, however, you should first consider what each has to offer and what pollutants you need to remove. You might have some idea about this already, but the best thing to do is talk to a professional who can help assess your indoor air and determine which types of contaminants are most prevalent in your home.

Different types of indoor air cleaners are better at targeting different types of contaminants. For instance, HEPA filters can remove up to 99.97% of particulate contaminants that measure 0.3 microns or larger. This includes things like pollen, pet dander, dust mites and mold spores, so if these are the things you want to target, an indoor air system that uses HEPA filters is probably right for you.

However, if you’re more concerned with getting rid of smoke odors and cooking fumes, you probably want a system that targets even smaller particles. Air ionizers are more appropriate for these types of indoor air quality issues, as they can effectively remove much smaller particles than most HEPA filters. On the flip side, ionizers aren’t as efficient at removing the larger contaminant particles, so if you want to target both small and large contaminants, you need a system that combines both of these technologies.

Bacteria and viruses are also a problem when they find their way into your indoor air and they can be particularly tricky to get rid of. HEPA filters and air ionizers both have trouble completely eradicating these pathogens, but UV germicidal lights can be incorporated into your indoor air cleaning system to tackle biological contaminants effectively.

No matter what type of home air quality problem you have, there is a system on the market that will target and remove the pollutant. The key is to know which pollutants effect you the most and which products will do the best job of removing them from your home.

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on Indoor Air Quality Options

Save with Maintenance on HVAC

Wednesday, June 22nd, 2011

You can never save too much money by making improvements and taking steps around the house. Of course, it is hard sometimes to see exactly where the money saving opportunities are. That’s because you expect to spend a certain amount on various types of services when you own a home. You know you are always going to have heating and cooling bills, for instance. But are they higher than they need to be?

For many people, the answer to that question is “yes.” And it is not because they use their home heating and cooling systems inappropriately or because they have the wrong equipment. It is simply because they neglect to get their HVAC systems the regular care and maintenance that would keep them running at peak effectiveness and energy efficiency.

When your HVAC system is new, it runs well and can be remarkably energy efficient. However, over time that energy efficiency will gradually deteriorate. This drop off in efficiency is often not obvious at first, but if you compare your energy bills from the year you got your system to bills for the same time of year and same usage five years later, you will probably notice that the bill has gone up quite a bit, and not just because energy prices have gone up.

You can do a lot to prevent this loss of energy efficiency, though, if you simply have a professional HVAC technician come out once a year and give your system a tune up. During this type of maintenance service, the technician will check over your entire system looking for worn out parts and buildup that could be interfering with your system’s performance.

They can clean out any areas of your HVAC equipment that require it and they will be able to make any necessary repairs at that time. Often, a technician performing this type of maintenance will be able to catch minor issues before they are able to develop into bigger problems. And while you still have to pay for the maintenance visit, the cost is much less than what you would pay for an emergency repair.

It also represents a substantial savings over what you would be paying on your energy bills every month without it. Regular HVAC maintenance can preserve the vast majority of your system’s energy efficiency loss over time, and it is never too late to start. Even if it has been several years since you had your system installed, you will still be able to get back the vast majority of your original energy efficiency by starting with regular maintenance now.

Continue Reading

Tags: , , ,
Posted in Services | Comments Off on Save with Maintenance on HVAC

Understanding House Ventilation Options

Wednesday, June 15th, 2011

All the fancy air quality control tools in the world are useless if you don’t have a good ventilation system to circulate air through your home each day. An air filter removes larger particles like dust, dander and pollen, and an electronic air filter removes smaller particles like bacteria, mold, and gases. However, your indoor air will still be poor without a fresh supply of air constantly circulating in from outdoors.

Types of Ventilators

There are a few options here, depending both on the number of contaminants your home has and the amount of heated or cooled air you are willing to lose each day through vents.

The simplest method is an exhaust fan. Fans blow air from your home, creating a negative pressure zone inside. Air inlets then allow new air to enter your home and equalize that pressure. There are also balanced exhaust fans – one fan blowing indoor air out and another fan pulling fresh air in. If you have open flames or gas burning appliances, a balanced exhaust fan is necessary to keep the flames from going out due to the negative pressure caused by a single outlet exhaust fan.

Traditional ventilation, while simple, is also inefficient. In the middle of winter it blows all of your heated air outside and in the summer, it does the same to your cooled air. Your home comfort system likely can keep up with the loss of heat or cooling, so you won’t be less comfortable, but you will certainly pay more on your energy bill.

That’s why heat and energy recovery ventilators are popular in many homes. Especially if you went to the trouble of having your home sealed up tightly to minimize energy loss, these ventilators will save you money.

When air is ventilated through a recovery unit, the energy and heat is transferred between indoor and outdoor air as it passes. In the winter, this means the energy in your indoor air is retained and during the summer, the energy in outdoor air is removed before it enters your home.

Which Method is Best?

The method you choose will depend largely on your current cost of heating and cooling and what types of contaminants you face. Energy recovery ventilators have the added benefit of patching directly into your indoor air quality units, so you won’t need to worry about new contaminants coming in either.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Understanding House Ventilation Options

UV Germicidal Lighting

Friday, June 3rd, 2011

With a state of the art home comfort system in place, complimented by a high tech indoor air cleaner, you may think you’re set to take on climate and contaminant related challenges to your air quality. But you’re probably missing one thing, and that’s the ability to remove living contaminants like bacteria and viruses from your indoor air.

Unlike non-living particulate indoor air contaminants, bacteria and viruses are not easily caught by indoor air filters or ionizers. They often slip through and continue to circulate again and again through your home, greatly increasing the likelihood that you and your family will get sick. They also tend to reproduce, so the longer you go without eliminating these germs, the more of them there will be.

Killing those Germs for Good

Fortunately there is a technological solution to this indoor air quality problem. The inclusion of ultra violet lights into your air purification system not only specifically targets bacteria and viruses; it helps to slow the spread of disease when someone in your home gets sick.

UV germicidal lights are extremely effective at removing all types of living contaminants from your indoor air. Unlike HEPA filters and air ionizers, UV germicidal lights don’t try to remove these contaminants by trapping them. Instead, they kill them outright, making sure that the germs can’t stick around to reproduce or work their way free of the containment system.

Installation and Maintenance

For most indoor air contaminants, you want to have someone test your air first. However, with bacteria and viruses, you can rest assured that they are always in the air around you. It often only takes a smaller number of pathogens to make someone ill.

Most UV germicidal lights are easy to integrate into your existing indoor air cleaning system. They are usually installed just past the filters so they can catch the germs without other indoor air contaminants getting in the way. And best of all, UV germicidal lights require very little attention or maintenance.

Simply put them in place and let them do their work. You should schedule a routine maintenance visit every so often to make sure that no part of your indoor air cleaning system needs to be repaired or replaced. But other than that, installing UV germicidal lights in your home allows you to relax and enjoy a completely contaminant free living environment.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on UV Germicidal Lighting