The Clean Air Act Blog: Posts Tagged ‘Energy Savings’

How to Maximize Savings in Your Home

Wednesday, October 5th, 2011

When you are thinking about different ways you might be able to save money around your Welches house, the tendency is to think big. Maybe you need to upgrade to a more energy efficient furnace, or it could be time to install a new central air conditioning system. Maybe it is even a good idea to switch to solar or geothermal power.

But before you do any of that, you may want to try some quick and easy ways to save money around the house with the equipment you already have. Here are 8 great ways to cut your power usage and keep those energy bills down without investing a lot in new equipment.

  1. Seal Up Your House – No matter how energy efficient the heating and cooling systems are in your house, you will be using more energy than necessary if your house is not tightly sealed. Make sure there are not cracks or places where drafts can get in and you will start saving money right away.
  2. The Right Thermostat Setting – Are you really going to notice the difference between 72°F and 69°F? Probably not, but you will save about 3% off of your monthly heating bill for every degree you turn the thermostat down. The same goes in the summer too, just backwards.
  3. Programmable Thermostats – And while we are on the subject of thermostats, it is a good idea to invest in a new one with programmable settings. That way you will be able to set your house to be warm when you will be there and you do not have to pay to keep it warm all day long if it is empty.
  4. Ceiling Fans – Ceiling fans can help keep you cooler in the summer and warmer in the winter. Plus, they cost very little to run so they are a great investment.
  5. Light Bulbs – Switching to energy efficient fluorescent bulbs all over your house will save you a ton even though they cost a bit more to begin with.
  6. Lights Out – But energy efficient bulbs will only get you so far. You should also be sure to turn off the lights in any room you are not using.
  7. Power Strips – Many home appliances draw a small amount of power even when they are not turned on. Use a power strip to easily cut the power to them completely and eliminate that drain.
  8. Sealing Windows – Plenty of air can come and go through your windows as well. Upgrading to more energy efficient windows is certainly an option, but you can also help to seal up your home inexpensively by covering your windows with plastic.

Continue Reading

Turn that Thermostat Down a Degree and Save Money

Monday, September 26th, 2011

There are literally dozens of things you can do to cut back on your heating (and cooling) costs in Troutdale. These range from things like getting a high energy efficiency system to just making sure that you have adequate insulation in all parts of your house. But too many people overlook one of the simplest things that you can do to cut down on your monthly heating bill, and that is to turn the thermostat down.

Of course, you did not pay for that high tech home comfort system just so that you could walk around cold all winter long. You certainly want to keep your house at a temperature that is comfortable, but what does that really mean?

The normal default setting for a home heating system is usually somewhere between 72°F and 75°F. If you have your thermostat set somewhere in this range in the winter, you are probably quite comfortable indoors. In fact, you might not even need a sweater. But would you really notice if it was a degree or two cooler? Would it be incredibly inconvenient to put on a sweater or sweatshirt after all?

The truth is that most of us will be just as comfortable at 69°F as we are at 72°F, and the effect that small adjustment can have on your heating bill is actually pretty significant. In fact, you will save an average of 3% on your monthly bill for every degree you turn your thermostat down. Drop the temperature down by three or four degrees and that will give you up to a 10% monthly savings – hardly something to turn up your nose at.

And setting the regular temperature in your house a bit lower is not the only way your thermostat settings can save you money. You will also save quite a bit if you take the time to turn down the temperature when you leave the house and when you go to bed at night. There simply is no reason to pay to heat your house when you are not there and you will certainly be rewarded with a lower energy bill for your efforts.

Continue Reading

Is Your Home More Valuable with Energy Efficient Appliances?

Monday, September 12th, 2011

It’s impressive the things people do to improve the value of their Tualatin home. We’re talking about crown molding, new floors, new siding, upgrades to the landscaping and much more. The cost of upgrading these things can grow out of hand quickly and if the boost to your home’s value isn’t equally exponential, it’s hard to justify the expense.

So, it’s always nice to find a simple upgrade that can be performed for a few hundred dollars that will save you money immediately and improve the value of your home in the future. Your appliances are one such upgrade.

The Value of Energy Efficiency

An energy efficient washing machine can save upwards of $150 per year on water costs. An energy efficient toilet cuts consumption by as much as 150%. Low flow shower heads cut water costs by one third to one half and your heating and air conditioning systems can be improved by 10-35% depending on the upgrades available to you.

When you add up all those savings, the result is a tremendous amount of money that can be saved each year on everything from your water bill to your cooling needs. Imagine what happens when someone looks to buy your home. They see that there are all new appliances with energy efficient ratings that will save them money.

It’s not just lower bills; it’s a decrease in upfront investment. On the surface, it’s unlikely that your energy efficient appliances will directly increase the value of your home, but they can increase the likelihood of someone paying what you’re asking for the home. They add value to the livability of the home, if not the property itself and in today’s housing market, that’s a major plus.

Best Upgrades

The best upgrades to your home’s appliances are the ones that save money without additional work. Major upgrades to your heating and cooling are good if you need an upgrade anyway or you plan on staying in your home for a few years.

Continue Reading

How to naturally cool your home

Friday, September 9th, 2011

In this day and age, it seems like no matter what type of problem you have in Oregon City, there’s a technological solution for it. But is that solution always the best? For instance, just because you can get a high-tech air conditioning system to keep your home at the same temperature regardless of the weather outside, does that mean that you should rely solely on that system?

Of course, the choice is yours, but before you decide how best to keep your house comfortable during the warm summer months, it’s a good idea to learn a little bit more about what your other options might be.

  • Cross-Ventilation – One of the easiest ways to take the edge off when the temperature starts to rise inside is to open windows on both sides of the house. This allows the breeze to come in one side and pass out the other, taking the stale, warm indoor air with it in the process and cooling off your house naturally.
  • Stack-Ventilation – If you have a two-story home, you may want to try stack-ventilation. This variation on cross-ventilation involves opening the windows on the bottom floor on one side of your home and on the top floor on the other. The differences in pressure from one area to the next cause fresh outdoor air to be sucked in on the ground floor and pushed out on the top floor, thereby creating a strong air current throughout your home.
  • Blocking Out the Sun – The number one reason that the interior of your house gets hot in the summer is exposure to direct sunlight, so anything you can do to diminish the amount of sun that actually makes it into your home, the better off you’ll be. All you really have to do is close the blinds on those windows where sun can come in to keep the majority of that heat from impacting your indoor environment.
  • Stay Away from Dark Colors – The color of the outside of your home can also have an impact on how hot it gets indoors. Dark colors absorb the heat, while light colors reflect it. So if you want to keep the temperature down inside, stick to light colors on the exterior of your home.
  • The Importance of Shade – Any type of shade will also keep the sun’s heat out of your home. Trees are a great source of natural shade. Awnings can provide great cooling power too without blocking out your view.

For more information about how to keep your house cool during the end of summer, contact your local HVAC contractor.

Continue Reading

How Do EER and SEER Work?

Monday, September 5th, 2011

If you’ve looked for a new air conditioner in Estacada recently, you probably noticed each unit comes with an EER or SEER rating. The former is for room air conditioners and the latter for central air conditioning units. In both cases, the number is a measure of how efficiently the system uses electricity. Effectively, if you buy a system with a high rating, you spend less on electricity. Of course, there are tradeoffs. The higher rated machines tend to cost much more, so as a homeowner, you’ll have to evaluate how much you can spend now and how long it will take to save money from that investment.

How EER and SEER Are Measured

These numbers are required by the government to tell you, the consumer, how many BTUs per hour the device can use for every watt of electricity drawn. The more BTUs a system can use, the better for your bill.

Let’s say you want to buy a 10,000 BTU system to cool your living room and dining room. A pretty standard number for a single room unit is 11, meaning the 10,000 BTU system would use about 900 watts per hour to run at full capacity. We figure this out by dividing the BTUs (10,000) by the watts (900).

There is a lot of math to do here, so many people simply look for a higher number within their price range. But, at what point is the upgrade really worth your extra money?

Choosing the Right Energy Efficiency Rating

The easiest way to describe this is to compare two similar devices with different EERs:

Air Conditioner 1 Air Conditioner 2
BTUs 12,000 12,000
EER 9 11
Watts 1333 1091
Price $300 $450

In this particular case, we can spend more for a device that is the same size but uses less electricity. The question then is whether that increased expenditure will pay off in the short term. Let’s assume each device would be operated for 10 hours per day for 30 days in a typical summer month. That’s 300 hours of operation. If the average cost per kWh in you are is $0.09, it will take 4 hours for the first air conditioner to consume 1 extra kilowatt of electricity equal to an additional $0.09. If your air conditioner runs for four months out of the year, we know that it will operate for a total of 1200 hours. That means:

[(1200 hrs x 242 watts) / (1000 watts/kw) ] x $0.09/kWh = $26

So, you save roughly $26 per year from that high efficiency unit. With a $150 price difference, you will break even after 6 years (though probably sooner if the price of electricity goes up).

If you want more information about energy efficiency and air conditioners, talk to your local professional.

Continue Reading

Air Conditioners and Energy Use by Percentage

Wednesday, August 31st, 2011

It’s no secret that air conditioners use up a lot of electricity and can add substantially to your energy bills during those warm summer months in West Linn. But did you know that all air conditioners actually account for an estimated 11% of the total energy used in all buildings in the US each year? This is a staggering figure and makes it easy to see why it’s best to invest in the most energy efficient system possible.

Keeping Your Consumption Down

There are plenty of reasons to try and keep your energy consumption down. You want to save on your energy bills, and the less energy you use, the better it is for the environment. The best and most straightforward way to go about this is to purchase only highly energy efficient appliances and equipment, and that includes air conditioners.

Because air conditioner usage accounts for such a substantial part of the total energy used in this country, putting more energy efficiency models into use is the best way to cut that usage down.

Supplementary Cooling

However, there are other ways to reduce the workload of your air conditioner. For instance, you can use a ceiling fan to maintain good air circulation and keep your home cool. Using a ceiling fan with an air conditioner, even on the hottest days of the year, allows you to turn up your thermostat a bit to conserve energy while still enjoying a comfortable indoor environment. And because ceiling fans use so little energy to operate, you’ll come out ahead on your energy bill.

Passive Cooling

There are also several passive cooling methods you can employ to keep the temperature in your home down. Blocking out sunlight is the most important of these, so keep your blinds closed on any windows that receive direct sunlight, particularly in the early afternoon. Alternately, you can have awnings put up, which allow you to block the direct sun while still keeping the blinds open.

Shade is another effective passive cooling device. Planting trees around your home to block out the sun at the hottest times of day is a totally energy-free way of keeping your home cool and reducing the workload on your air conditioning system. The less your air conditioner has to work, the less energy it consumes and the lower your energy bills will be.

Continue Reading

How to Use AC Most Efficiently

Wednesday, August 10th, 2011

Air conditioning is definitely something most of us wouldn’t want to try and get through the summer without, even in Colton. And for a lot of people, because of medical or other conditions, it’s an absolute necessity. But just because you need to run your AC unit all summer doesn’t mean you need to suffer under the weight of astronomical cooling costs.

So if you’re interested in ways to save on cooling without sacrificing comfort, here are a few tips to get you started:

  • Get a Programmable Thermostat – When you come home at the end of a long day, you want your home to be cool and comfortable. But if you only have a basic thermostat, you would have to leave your air conditioning on all day in order to make this possible. Paying to cool an empty house is probably the last thing you want to do. But what is the alternative?

    Programmable thermostats offer the best solution in a case like this. These devices can be easily integrated into just about any home air conditioning system and they allow you to set different temperatures for different times of the day. That means you can have your air conditioning off while you’re not home and set it to come on a half hour or so before you get there. This way, you get the pleasure of walking into a cool, comfortable house without paying extra to keep it that way when you’re not home.

  • Incorporate Passive Cooling – The design of your home and how you use it can also have an effect on how hard your air conditioning system needs to work. Taking steps as simple as closing the blinds to block out the afternoon sun, putting up awnings and making sure that the exterior of your home is painted a lighter color to reflect sunlight rather than a darker one that will absorb it are all excellent ways to reduce the load on your air conditioner.
  • Supplement Your System – You can also take a good chunk out of your cooling bills by using things like ceiling fans in conjunction with your air conditioner. A ceiling fan can effectively lower the indoor temperature several degrees on its own, allowing you to set your thermostat a little higher.

Air conditioning is a major expense that most of us are resigned to paying, but there’s no reason to pay more than necessary with so many strategies available to save money.

Continue Reading

What Is SEER?

Monday, August 8th, 2011

If you’ve been looking at air conditioners in Gladstone, you’ve probably noticed that they all seem to have a SEER rating. But what does this actually mean?

The SEER, which stands for Seasonal Energy Efficiency Ratio, is a measure of how energy efficient a particular air conditioning model is. So when you’re shopping around for the best deal on an air conditioner for your home, this is something you’ll absolutely want to pay attention to.

Interpreting SEER Ratings

The SEER rating system is relatively simple – the higher the SEER, the more energy efficient the product. But because a higher price tag typically comes with a higher SEER rating, it’s important to know just how much more efficient a higher rated unit will be. It helps you decide whether paying significantly more for a higher rated unit is worth it in long term savings. Will it actually save you enough each month to make up for the difference in price?

Evaluating Your Energy Usage

A big factor here is how much you will use your air conditioner. If you live in a place with very hot and humid summers where the air conditioning runs constantly, you’re probably best off with the highest SEER you can find. When you consume that much energy to keep your home cool, you want to get as much as possible out of it, and that’s what a high SEER model can do for you.

On the other hand, if you live in an area that doesn’t have the harshest summers, you may be better off with a slightly less efficient (and therefore cheaper) model. Keep in mind, too, that the actual percentage increase in energy efficiency goes up by smaller and smaller increments the higher in SEER ratings you get. For instance, while a 10 SEER unit may be almost 20% more efficient than an 8 SEER model, a 12 SEER is only about 10% more efficient than that 10 SEER.

Finding the Right Balance

The best way to decide what SEER rating is best for you is to determine the annual cooling costs with your current unit and then calculate your savings in dollars based on the percentage each model would improve your efficiency. If you don’t currently have an air conditioner, this can be a bit tricky, but a professional contractor or air conditioning salesman can help you estimate your total monthly cooling costs with the various units.

Continue Reading