The Clean Air Act Blog: Posts Tagged ‘Indoor Air Quality’

Simple Household Cleaning Tips on How to Maintain Good Indoor Air Quality

Wednesday, September 14th, 2011

There are a lot of reasons to clean your Canby house. Guests, children, pets, simple peace of mind – without the right amount of cleaning, a messy house can quickly get out of control. But, don’t forget the health benefits of removing excess dust and sediment from your home with regular cleaning. Of course, air cleaners are one solution, but there are other ways you can help improve your air quality. To ensure your indoor air quality stays good, here are a few basic cleaning tips you can implement right away.

  • Regular Vacuuming  – Most people vacuum occasionally when it’s obvious that carpets are getting a little messy. Consider increasing the frequency of your vacuuming to at least 3-4 times per week, possibly more, especially if you have pets. Regular vacuuming removes a lot of the airborne particles that can get into your lungs and cause allergies or asthma flare ups.
  • Remove Junk from Floor Spaces – Toys, garbage, clothes, and other random junk sitting on the floor can create air quality problems, especially if they are near or around vents.
  • Bathe and Brush Pets – Pet dander is a top contributor to indoor air quality problems. Bathe and brush your pets once a week to reduce hair loss and get rid of all that excess dander that builds up over time. Consider it an investment in the cleanliness of your home.
  • Shoes Outside – Shoes bring in pollen and other outdoor pollutants. Take them off outside and you will reduce the number of contaminants that make it inside.
  • Remove Moisture from Bathrooms – Bathroom moisture results in mold growth and the development of other allergens. Wipe down the walls of your shower and mop the floor daily to remove excess moisture after showers.
  • Food Waste – Throw away food waste immediately. Food in the sink or garbage can attracts bacteria and bugs and can result in mold growth very quickly. Consider a compost bucket or pile outside where food waste can be disposed or purchase a garbage disposal to get rid of it immediately after eating.

There are dozens more little things you can do that will reduce the amount of allergens and pollutants that build up in and around your home. Consider creating a simple calendar schedule you can follow from day to day to keep your indoor environment clean and healthy.

Continue Reading

What Is a Whole House Pressurization Test and Should I Get One?

Monday, July 18th, 2011

If you have a forced air heating or cooling system in your home, you also have a system of ducts through which that heated or cooled air circulates. And most people don’t give a second though to those ducts. After all, if your heating and cooling systems are working, the ducts must be doing their job, right?

Unfortunately, that’s not always the case. If ducts are not working properly, the whole system will be in trouble, even when you don’t realize there is a problem. That’s why a pressurization test is so important – it provides peace of mind knowing that your home’s ductwork is not only properly installed, but that it doesn’t need any special repairs.

Why Pressure Matters

Your duct system depends on proper pressurization to evenly and efficiently distribute air throughout your home. Leaks, cracks or clogs in the system can disrupt that pressure and lead to uneven or inadequate movement of air through your ducts. This causes problems you may not notice, so if you haven’t had your ducts checked for proper pressure in a while, it’s worth looking into.

Improper pressurization causes symptoms like hot or cold spots in your home or an overall drop in the effectiveness of your home heating and cooling system. When loss of pressure is due to a leak that lets in unfiltered air from outdoors it can also lead to a decrease in indoor air quality. Often these symptoms are easy to ignore. But by doing so, you only allow the situation to get worse.

A whole house pressurization test is the best way to determine the state of your home duct system. By using high tech diagnostic equipment, home HVAC professionals check over your entire system to determine whether you have a pressurization problem. If so they can then quickly pinpoint the source. Once that’s done, the repairs are usually quite simple and you’ll get much more out of your home heating and cooling system than you did before.

Even if no symptoms of improper pressurization in your ducts have presented themselves, it’s worth having one of these tests performed. Especially if you don’t know when the system was last checked, a whole house pressurization test can help uncover small problems before they turn into bigger ones. And the peace of mind this provides is well worth the day it takes to perform the test.

Continue Reading

Mold…What if I Have Mold?

Wednesday, June 1st, 2011

No one wants to find mold. But, even if you’re not aware of it, mold is probably lurking somewhere in the damp, dark crevices of your home. And mold is particularly likely to grow in homes with improperly regulated humidity. Luckily, because we know that, there are quite a few things we can do to stop the growth of mold in its tracks and save your home from unsafe air quality and the damaging effects of those little spores.

The Dangers of Mold

As mold grows, it can do damage to your woodwork and other areas of your home. It also contributes to indoor air quality issues because mold spores are a significant indoor air contaminant. Many people are allergic to mold spores, so if you or someone else in your household has experienced allergy symptoms that you can’t explain, mold spores are a likely culprit.

If you find out there is mold in your home, don’t panic just yet. There are some things you can do to address the problem and get mold out of your house for good. Your main task will be getting rid of the mold that is already there. This isn’t necessarily easy because of the areas mold tends to grow in. But, even with the proper air quality treatment, your home and health is still at risk if you don’t target that existing mold fast.

Stopping Mold in Its Tracks

Just getting rid of existing mold won’t solve the problem, though. Mold keeps coming back as long as there is an environment to support it – and that means moisture. Mold requires water to grow, so the chances are that if you have a mold problem in your home, you also have a humidity problem. Getting your indoor humidity under control will make it much easier to remove and keep mold out of your home for good.

There are plenty of good humidification systems on the market today. They can be easily integrated into your home heating and cooling system and provide great, consistent humidity control. Make sure you get one that’s large enough for your home. An indoor air quality professional can help you make that determination. Once you have a good humidification system in place, you’ll notice a huge difference in your overall indoor air quality, and hopefully the problem won’t return anytime soon.

Continue Reading