The Clean Air Act Blog: Posts Tagged ‘Oregon City’

Maintenance Really Does Save Money

Monday, June 20th, 2011

When it comes to your home heating and cooling systems, you really cannot go wrong with proper annual maintenance. While it may seem like an unnecessary expense, especially if your systems are relatively new, you will save a lot in the long run if you pay that small fee once a year for each system.

During a maintenance visit, a technician can thoroughly clean out your heating or cooling system and check all parts to make sure they are not showing signs of excessive wear and tear. If they do find a problem or a part that needs to be replaced, they will be able to make the necessary repairs quickly and you will not have to worry about calling someone out later for an emergency visit.

Also, catching problems early like this means that repairs will likely involve fewer parts and cost much less than they would if you let the problem go and it became more widespread. The truth is that your heating or cooling system can continue to work when one or another of its parts is not working correctly, but that means that other parts of the system have to work overtime to create the same result.

Your heating or cooling system will also be much more energy efficient if it receives regular tune ups and attention from a professional. Even the best new systems lose a small percentage of their efficiency each year that they are in operation. While this is not much from year to year, the cumulative effect will soon cause your energy bills to climb higher than necessary.

Paying for regular maintenance, then, can actually save you money because it will mean you pay less each month to run your system. And it is never too late to start. Even if your heating or cooling system is not new, it will benefit from a thorough cleaning and tune up. You may be quite surprised how much your energy bills go down after this type of service has been performed.

Annual maintenance can also help you to get more for your money by extending the useful life of the heating or cooling system. Many systems that are properly maintained can last even beyond their expected life span, meaning that you will not have to replace it as soon as you would have otherwise. For all of these reasons, the minimal cost of an annual maintenance visit is well worth paying over the long term.

Continue Reading

How a Thermostat Works

Monday, June 13th, 2011

Your thermostat is designed to closely monitor and maintain the temperature in your home. When you flip the switch, you want your furnace or air conditioner to respond immediately. So, it’s a good idea to learn how it works so that if there is a problem, not only will you know better what needs to be fixed – you can decide whether to call a professional in for help.

Thermostats shouldn’t need input from you other than to set the initial temperature. From there, they are automatic switches. A thermometer inside the thermostat measures the indoor air temperature. When it gets above or below the limit you’ve specified, it triggers the thermostat to send a message to your home comfort system and keep things nice and comfortable.

Types of Thermostat

Thermostats come in two forms –electromechanical and electronic. An electromechanical thermostat is the simplest and has been used for decades to regulate temperature in homes. It has a simple strip or coil of metal that expands as the temperature rises and contract as it lowers. A mercury thermometer is placed on top of the strip. The coil’s movements cause the vial to tip as the temperature changes. There is a pair of electrical contacts on either end of the vial. The mercury can absorb that electrical current when the electrical contacts touch the thermometer. The mercury then acts as a switch to turn on your comfort system.

An electronic thermostat simply has an electronic sensor that measures the indoor air temperature. You set a temperature for your room and when it changes significantly, the switch inside your electronic thermostat is triggered, causing it to turn on your comfort system.

Ways to Upgrade Your Thermostat

Most homes only need the bare minimum in their thermostats. However, there is some very exciting technology on the market these days that can add quite a bit of value to your system. Not only can you install a programmable thermostat, you can opt for zone control systems that allow multiple thermostats in different rooms of your home.

Programming allows you to set temperatures for certain times of the day. This is especially great if you are gone from the house for long periods of time each day. Why heat or cool a home when it is empty? And if you have multiple people with different temperature needs, zone control temperature control allows you to set specific temperatures for specific rooms in your home – a very enticing option for large families or multi-story homes.

Continue Reading

Ductless vs. Duct Air Conditioning Systems

Wednesday, June 8th, 2011

When it comes time to pick out a new air conditioning system for your home, you will have to make the choice between ductless and duct models. While both of these types of systems have their advantages, the specifics of your situation will go a long way to determining which one is right for you.

Ductless air conditioning systems are becoming more and more popular these days for a number of reasons. For one, they are generally considered more energy efficient than their ducted counterparts. Also, ductless systems are often cheaper and simpler to install, particularly in a house that does not already contain ductwork.

These types of air conditioners use refrigerant lines to connect the indoor unit or units to the outdoor compressor. The refrigerant lines take up much less space than ducts do and they also are much easier to install. Refrigerant lines can also reach into areas of your house that ducts may not be able to, making it possible for you to bring the benefits of air conditioning to places that did not have access to it before.

The indoor unit of a ductless air conditioning system can generally handle the cooling load of one or two rooms, but if you want to cool a larger space, it will be necessary to install multiple indoor units throughout the house. All of these units can connect to the same outdoor compressor and they can also be controlled individually. That means that you can set different temperatures in different parts of your house and you do not have to pay to cool the entire space if no one is occupying certain parts at the moment.

A duct air conditioning system also involves indoor and outdoor components. However, these elements are connected to each other by a system of ducts rather than by refrigerant lines. In a duct system, cooled air is brought inside from the compressor and then circulated through various ducts by the air handler.

The latest duct systems are quite energy efficient as well, and they can also be coupled with zone control systems to create different climate zones within your house. Particularly if you already have some ducts in place, a duct air conditioning system can be a great option for you.

Continue Reading