The Clean Air Act Blog: Posts Tagged ‘Portland’

Features to Look for When Buying an Air Conditioner

Monday, August 6th, 2012

Air conditioning systems have come a long way from the loud window units you may remember from years past. If you’re in the market for a new central air conditioner in Portland it can be overwhelming trying to navigate through all the new models and technologies available to you. The important thing to keep in mind is not what the “best” air conditioner features are, but what features are the best for you. New and improved options are only relevant if they’re options that you’re actually interested in. At The Clean Air Act Inc. we want to make sure that you get the air conditioner that’s right for you and your home. Here is some information to give you an idea of what features are available and whether or not you will benefit from them.

Programmability

The ability to program your air conditioner’s output is a great way to fight inefficiency. Programmable thermostats paired with zoning technology will help you cut down on your energy use and reduce utility costs. By breaking your home into cooling zones, each controlled individually from the thermostat, and cooling your home only during the necessary times of day, a programmable system can really reduce the energy and monetary concerns of running your air conditioner.

Versatility

Take into account any comfort issues you know to exist in your home. If your home is consistently, uncomfortably humid, think about an air conditioner with a dehumidifying feature. Should indoor air quality be a priority for you, look into systems that continuously filter air even when the cooling system is off. Fresh air intakes and exhaust settings also allow air to be vented without cooling. With so many options available there is no reason for you to wind up with an air conditioner that will not satisfy all your comfort needs.

Keep Your Home in Mind

When it comes to a home cooling system you must keep your home’s needs in mind as well as your own. If you have preexisting ductwork then a central forced air system will be an easy installation. If you do not have the room for ductwork there are ductless mini split systems available that require only a conduit to connect the outdoor components to indoor blowers. For historic houses, look into small-duct high velocity systems to avoid virtually all renovation. There are enough air conditioning options out there to suit every individual and every home.

A home cooling system is an investment. Don’t rush into a decision. Take your time, consider your options and available features, and get the air conditioner that’s right for your Portland home. The Clean Air Act Inc. is here to answer any questions you may have, so call us anytime.

Continue Reading

Tags: , , , , ,
Posted in Air Conditioning | Comments Off on Features to Look for When Buying an Air Conditioner

Why is My Central Air Conditioner Making Noise?

Monday, July 16th, 2012

A good air conditioner is a life saver in the midst of a hot and sticky summer in Portland, but just because the system makes you comfortable and makes the hottest months bearable doesn’t mean you want to hear it clanging and banging all summer. If you notice excess noise coming from your air conditioner, it might be a problem that can be fixed by your technician. Here are some common causes of excess noise from an air conditioner and what you can do to fix them.

  • Blower – The blower is a motor and fan blade assembly. If the blade touches the housing or if the motor needs a tune up, it might start to make excess noise. Loose screws, foreign objects, or a need for oiling or new parts will all cause noise problems but they are all easy fixes for a Portland AC professional.
  • Ductwork – If the sounds you’re hearing are in the ductwork or vents, it may be due to expansion and contraction in your ventilation system. This is normal and while it may be obnoxious, it tends not to persist during the hottest months as temperature won’t fluctuate as much.
  • Bubbling Sounds – If you hear a gurgly or bubbly noise coming from your indoor unit, it may be due to a blockage in the condensate line. The easiest solution is to have technican clean the condensate line and check for any clogs or blockages in the system.
  • Clicking Sounds – If you hear a clicking sound, it is likely from the relay or contactor in the system. If this is the case, have a professional check it right away. Electrical problems are not to be taken lightly where your air conditioner is concerned.
  • Foreign Objects – Sometimes, the condenser fan will make a lot of loud noise because foreign objects get stuck in there. Sticks, leaves, toys, food from small animals – it can all get stuck in the fans and make a tremendous amount of noise. Keep the area around your condenser unit clear of debris and check it often if you hear loud noises.

Most noises from your central air conditioning unit are explainable and can be fixed relatively easily. If you cannot find the source of the noise, however, and it is only getting worse, call the Clean Air Act Inc. before the problem grows.

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on Why is My Central Air Conditioner Making Noise?

Cooling Coil or Evaporator Coil Diagnosis & Repair for Air Conditioners

Monday, July 9th, 2012

Inside the air handler of your Portland air conditioning system is a cooling coil or evaporator coil. From a home cooling perspective, this is where the magic happens: where the actual cooling occurs. So, if there is a problem with the cooling or evaporator coil, you will notice a decrease in the performance of your AC system.

You may notice that the air flow has slowed significantly or even stopped, even though you can hear the air handler running. You may also notice that the air isn’t as cool as it used to be or should be. Aside from having a house that is not cool enough, this can also cause problems like high electricity bills or damage to other parts of the air conditioner. Use this quick guide to start diagnosing and repairing the problem.

Diagnosis

For starters, just try to get a good look at the cooling coil. Some problems are obvious enough upon visual inspection that no further diagnostics or major repair is necessary.

If you are able to see the cooling coil, look for things like:

  • Dirt and debris
  • Mold
  • Staining that indicates a refrigerant leak
  • Ice or frost
  • Damaged fins on the coil

Repair

Any of these could be the culprit that is degrading the performance of your Portland AC system. Some of these you can take care of pretty simply on your own – if there is obvious debris that you can remove safely, do so – but for most repairs you will want to call in a licensed technician. Especially if the problem is something potentially hazardous like mold growth or a refrigerant leak, you don’t want to take the risk. Let a professional from Clean Air Act who is trained in safely and effectively repairing the problem take care of it, so that your home can be comfortable again.

Continue Reading

Tags: , , , ,
Posted in Services | Comments Off on Cooling Coil or Evaporator Coil Diagnosis & Repair for Air Conditioners

When Should You Check Your AC Filters?

Monday, July 2nd, 2012

The filters on your Portland air conditioning unit are vital for keeping out the dust and debris that make things like illness, allergies and air quality worse. And it’s important that you take personal responsibility for checking those filters. Sure, you have a Portland air conditioning professional visit your home once a year to check the air conditioning, but you should also check the system yourself on a semi-regular basis for possible filter degradation.

Monthly Checks

So, how often should you check? Think of it this way. There is no such thing as checking too much, but you can easily not check often enough. So, we recommend checking your filter at least once every 4 weeks. It may not always need to be changed during that four week checkup (sometimes it can last 6 weeks or longer), but it’s good to take a peek.

Why is this so important? Because filters that haven’t been checked and changed as needed have a habit of building up excess sediment and debris. Not a problem when it comes to actually working, but a huge problem when it comes to your energy bill. The harder a system has to work to keep you house cool, the more energy it draws and the more you pay to have cool air in your home. And it will break down much faster as a result of overwork and dirty filters.

Changing an AC Filter

If your filter is ready for a swap, here are some quick tips to get the job done:

  • Find Your Filters – If you don’t know where your filters are, ask your contractor on the next visit or look near the return grills by the thermostat.
  • Remove the Filters – Open the latches and pull the old filter out to check it. You should be able to see clearly through a permanent filter and a disposable one should still be white. If this isn’t the case, it’s time for a cleaning/replacement.
  • Clean the Area – Clear the grill and area of any debris and sediment that might make the filter worse after replacement.

Proper filter maintenance only takes five minutes and it will save you money every month you run your Portland AC – not a bad deal for a few minutes’ work. For any more information about air conditioning system maintenance, give Clean Air Act a call!

Continue Reading

Tags: , , , , , ,
Posted in Services | Comments Off on When Should You Check Your AC Filters?

How Your HVAC System Uses Electricity

Monday, June 18th, 2012

While not every HVAC system in your Portland home requires electricity, many of them do. Your air conditioner, electric furnace or water heater and ventilation system all need access to the central power line. So what does that mean for your system and what problems should be you beware of?

How Your HVAC System Uses Electricity

How your HVAC system works depends largely on which components need electricity to operate. Here is a quick summary of how each system uses electricity:

  • Air Conditioning – Most air conditioners are electric and therefore use electricity based on the number of BTUs produced. For example, if your air conditioner produces 25,000 BTUs and has a SEER of 16, it can produce 16 BTUs for every watt of electricity consumed per hour. As a result, it consumes 1,562.5 watts per hour when the system is running at maximum capacity. If it runs at full capacity for 8 hours per day, 30 days a month in the summer, that’s 375 kilowatt hours – which is the measurement unit you’ll see on your electric bill.
  • Heating – Your heating system may not use electricity, as many homes today use gas or oil combustion furnaces or boilers to produce heat. However, if you have an electric furnace, that electric power is used to heat the filament in the furnace. Electricity also powers the blower fan motor which pushes air across the filament and into the air handler. An electric furnace sized to heat a 1500 square foot home can use up to 8,000 watts per hour to produce enough heat for your home. That converts to roughly 5,000 kilowatt hours per month. The current price of electricity will determine how much this actually costs, you but it can really add up quickly.
  • Ventilation – Your ventilation system is almost always going to use electricity to circulate and filter air. While mechanical filters rely on the movement of air to remove certain particles, ventilation systems have a variety of components including fans and possibly even condenser coils to conserve energy as air is exchanged between the inside and outside.

Electricity plays an important role in your Portland HVAC system no matter how your system works. To ensure yours continues to operate as intended, have your power system checked on a regular basis when the rest of your HVAC system is serviced. Call Clean Air Act today to schedule a maintenance appointment for your Portland HVAC system!

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on How Your HVAC System Uses Electricity

Consider This Before Going Thermal In Your Home

Tuesday, May 29th, 2012

With energy costs rising and supplies dwindling, people are taking much more serious looks at alternatives that in the past have seemed unfeasible and too “weird” to realistically contemplate.  One type of heating and cooling appliance that is gaining popularity in Portland is geothermal heating and cooling.

Plentiful beyond imagination just ten feet below the surface, geothermal is being used to provide more than 30% of Iceland’s electrical needs and it is fast becoming a viable option to provide heat and electricity for your home as well.  Before digging straight down, however, it is important to look around and consider some important points.

Geothermal 101

Thermal energy is a force that is produced from the movement of warm temperature to cooler.  The term “geo” is from the Greek word for Earth.  Geothermal energy is the unlimited resource of power that is the result of the formation of the Earth billions of years ago (20%) and the on-going process of melting rocks nearing the core of that heat (80%).

From harnessing the energy of hot springs in ancient times to technological advances to create electricity today, geothermal has long been considered, but often was ruled out as an expensive and unnecessary alternative to other cheaper forms of energy.  Now that those are harming the environment, more expensive and harder to get, geothermal has grown attractive.

Location, Location, Location

Difficult to retrieve from deep within the Earth, geothermal is most often considered for large production where natural breaks in the crust such as volcanoes, hot springs and faults are close to the surface.  Just ten feet below the surface, however, there is enough temperature difference to make available enough to efficiently supply a home.

Still, it’s not a guarantee of success, however.  The density of the bedrock, the water table and the balance between extreme hot and cold temperatures with the temperatures of the thermal energy are all factors to be considered.

Dollar for Dollar

For new construction, geothermal is a great alternative because after the more expensive installation, the cost from month to month can produce enough savings to quickly pay for the system.  The savings are potentially so significant, there are situations where the cost of replacing an old inefficient conventional system can be neutralized by the savings in just two to ten years.

Beyond cost and feasibility, the comfort level is a major consideration.  One of geothermal energy’s major attractions is that to help save the Earth, it offers a better way to tap into the Earth.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Consider This Before Going Thermal In Your Home

Air Conditioning from Your Smart Phone

Monday, May 14th, 2012

Most Welches residents are getting comfortable playing games and checking emails on the tiny screens of their smart phones.  Some are even watching movies and music videos, and for many, the smart phones have become the camera of choice to record their way in the world.

But have you considered the many practical ways a smart phone can be used to perform valuable functions in your home, greatly reducing energy costs and the size of your carbon footprint? The solution to one of our biggest problems is in your hands.

Smart Homes

New technology is both visible and invisible in many more ways around your home than just your giant TV screen or computer.  New homes today are being configured with wireless technology that does much more than connect you with the World Wide Web.

From the garage door opener that welcomes you to the alarm clock that sends you on your way, improvements are capable of being built-in or retrofitted into every nook and corner of the way you live, all controlled by your fingertips on the screen of your smart phone.  The technology is available and the only impediment today is finding the way to distract average consumers from their entertainment apps to learn how they can utilize the tool to increase their comfort (and give them more time to play).

One Touch Convenience

Instead of a brash buzz from the digital alarm clock on the nightstand, imagine being lured awake by the soft sounds of classical music and the succulent aroma of your favorite coffee brewed freshly to your specification.  From your phone, you can remotely direct this dream into reality.

On a cold winter night without wastefully leaving the heat on all day or risk of burning the house down, you can return from the workplace to a cozy home with a warmth of your heating system.  The oven is pre-heated and ready to roast.  The big screen is poised to play that game you couldn’t watch last night.  Even the car has been warmed up and waiting to comfortably get you on your way.

Cool When You Need to Be

As the reality of climate change sinks in, the wacky weather patterns that are bringing unpredictable heat spells and cold snaps creates unusual inconveniences.  If a sudden cold front rolls in when your air conditioning unit was scheduled to run, you could waste a ton of energy.  But with new wireless thermostat technologies that does not have to occur.  New apps allow you to turn off your air conditioning unit from wherever you are.

From your phone away from home, the new technology enables you to check the temperature inside and out and adjust the thermostat accordingly.

The Best is Yet to Come

The growing awareness of environmental change and our ability to impact it for better or worse is creating a “can-do” attitude amongst inventors, supply-side providers and consumers.  Join the party and put your toy to work!  Call The Clean Air Act today to learn about more interesting ways to save energy and stay efficient.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Air Conditioning from Your Smart Phone

Improving Indoor Air Quality with UV Germicidal Lights?

Monday, April 30th, 2012

To improve the indoor air quality use ultraviolet germicidal lights in Portland homes to kill harmful bacteria, viruses, and toxic mold that can cause respiratory problems and other health concerns. These microorganisms spread by releasing airborne spores containing the genetic material used to create a new organism. UV lights use a wavelength of ultraviolet light to destroy the organism’s DNA, which takes away their reproductive capabilities and also kills them.

UV germicidal lights are fairly inexpensive and can be installed to work with your existing forced air HVAC system. They are typically used in tandem with either an electronic or mechanical air cleaner. While air cleaners can filter pollen and other irritants, UV germicidal lights destroy the viruses and mold spores once these pollutants have been trapped by the air cleaner. After the air has been filtered through your HVAC, it will circulate more easily through system and increase the efficiency of the unit. In addition, UV lights are useful in killing hidden mold growth, which can only be detected by special thermal imaging equipment.

Homeowners with particularly chronic allergy problems or extremely poor indoor air quality choose to install both types of air cleaners, in addition to a UV light, for the ultimate protection from indoor air pollutants—from bacteria to pet dander.  If your home lacks adequate ventilation, or if you are unable to control the source of common pollutants, you might benefit greatly by installing UV germicidal lights. Poor indoor air circulation can exacerbate the spread of harmful microorganisms, so make sure you have proper ventilation if you don’t have UV lights in your home.

UV germicidal lights have also been used to filter tap water because they are more reliable and easier to install than other water treatment systems. However, they are typically used to provide cleaner indoor air quality.

Call Clean Air Act if you have questions or concerns about the quality of the air inside your Portland home.

Continue Reading

Tags: , ,
Posted in Services | Comments Off on Improving Indoor Air Quality with UV Germicidal Lights?

The Most Effective Environmentally Friendly Heating Methods

Monday, April 9th, 2012

Protecting the environment is a priority for many homeowners these days. The problem is that it can’t be as a high a priority as your heating system in Portland home. Sure, you want your home to be environmentally friendly, but you need it to be warm.

So, it seems you are forced to run your electric or high efficiency furnace as much as is necessary and hope that it’s not too much for the environment — or your wallet — to take.

Beyond the traditional heating methods of electricity, gas, oil and what have you, there are some alternatives out on the market these days that can keep your home warm while also being green.

Geothermal

One solution is geothermal heat, which harnesses the natural heat of the Earth to warm your home. Pipes filled with coolant run through the ground outside your home, absorbing the warmth of the Earth. Then, the warm coolant is pumped into your home through a network of pipes that radiate heat.

This method is effective and requires no additional fuel or energy.

Micro Combined Heat and Power (MCHP) Systems

Relatively new to the game are so-called MCHP systems. These heating systems have on-board power generators with high-efficiency computer modules attached. The power module interfaces with the thermostat, calling for heat when necessary. That activates the generator system, which quietly and efficiently generates all the necessary power to run the heater.

These systems are incredibly efficient and can slash the cost of your heating bill. As an added benefit, they continue to work during power outages, which has obvious utility in areas that experience harsh winter storms.

Solar

Then, of course, there is the most obvious and readily available source of heat to the whole planet: the sun. Solar heating systems can be either active or passive, which essentially just depends on whether additional specialized equipment is to be installed.

Obviously, solar heating systems are a better choice for areas that get a lot of sunlight year round.

Whichever environmentally friendly heating solution you choose, they have the added benefit of lowering your heating bill, which is always welcome.  Call Clean Air Act if you have any questions

Continue Reading

Tags: , ,
Posted in Services | Comments Off on The Most Effective Environmentally Friendly Heating Methods

The History of Heat Pumps

Monday, April 2nd, 2012

Thermal energy is the natural movement from warm temperatures to colder temperatures creating energy in the change of temperature to the mass.  A heat pump typically is a device that moves the air (or other matter) in the opposite direction from its natural flow.

A heat pump often uses an intermediate fluid called a refrigerant which absorbs heat as it vaporizes and releases the heat when it is condensed,  using an evaporator to absorb the heat (or energy) from inside an occupied space and forcing this heat to the outside through the condenser. The key component that makes a heat pump different from an air conditioner is the reversing valve which allows for the flow direction of the refrigerant to be changed, allowing the heat to be pumped in either direction.

Timeless Technology

While mechanical movement of this energy, what we can actually call a pump,  has been a relatively recent invention,  the concept of this principal of physics has been in use since ancient times. Harnessing the power of geothermal energy (produced from the heat of the earth itself), natural hot springs “pumped” warm air into cool spaces in China and Europe thousands of years ago.

By 1852, Lord Kelvin had theorized the heat pump, but it took nearly 100 years to actually build one.  In the last half century, the technological advances have made heat pumps part of our lives in many ways.

First Pump

In the 1940s a man named Robert Webber was motivated to build the first known heat pump while tinkering with his refrigerator.  Accidently burning his hand on the outlet pipes of the cooling system, he was quite painfully awakened to an idea about the transference of heat.

Recognizing the freezer was constantly producing heat to cool its interior, he connected the outlet pipe to the storage tank of his hot water heater, extended that into a flow through pipes which heated air nearby, and  then used a fan to blow the warmth into another room.

The first heat pump was a crude, but effective method to provide comfort.  Creating a full-size version soon after, Wagner could heat his entire home.

Heat and Electricity

Today Portland heat pumps are built in many ways and shapes to heat or cool buildings of many sizes.  Combined with geothermal forces close to the Earth’s surface or potentially  deep within its fiery core, heat pumps are able to energize the turbines that can produce huge amounts of electricity

As technological improvements are refined during this time of climate change and dwindling fossil fuels, heat pumps promise to play an important part in our futures.

If you are interested in having a heat pump installed in your home, call Porland HVAC professionals Clean Air Act Inc.!

 

Continue Reading

Tags: , , , , ,
Posted in Services | Comments Off on The History of Heat Pumps