The Clean Air Act Blog: Posts Tagged ‘Sandy’

Should I get a space heater or upgrade my heating system?

Monday, November 7th, 2011

If your heating system isn’t really cutting it in your Molalla home anymore, it may be time to take a step back and consider what your options are. After all, upgrading to an entirely new heating system is a big investment and a large project that will likely disrupt your life at least for a short period of time. However, under certain circumstances it’s the best alternative out there.

One option to consider when you’re unhappy with your home heating situation is supplementing your central heating system with space heaters. These are generally inexpensive and can be placed virtually anywhere in your house or taken with you from one room to another.

Especially if there is a small part of your home that your heating system just doesn’t seem to reach or that you want to keep a bit warmer than the rest of the house, space heaters can be an excellent option. They’re small, safe and portable and can easily keep a smaller portion of your home or room cozy and warm.

However, you’ll have to take into account the operating costs of a space heater as well as the initial investment when you’re trying to evaluate the overall cost effectiveness of this option. Most space heaters run on electricity, which often costs considerably more than oil or natural gas. If your home heating system runs on electricity anyway, this might not be so much of a factor. But if you have an oil or gas furnace, you could wind up paying significantly more to run space heaters as supplemental heat over time.

Also, it’s worth considering that new home heating systems are likely much more energy efficient than the system you currently have in place. Although the initial installation cost can be pretty substantial, you’ll wind up saving a very large amount on your monthly heating bills by upgrading to a newer model.

Plus, you’ll be getting a system that should be able to satisfactorily heat your home without the need for space heaters or other supplemental heat sources. This translates into a pretty hefty savings over time and that’s something you’ll certainly have to take into consideration when you’re evaluating your options.

Continue Reading

How to Clean the Parts of a Heat Pump

Wednesday, October 26th, 2011

It is very important to keep the heat pump in your Newberg home clean. It improves efficiency, helps performance and prevents malfunctions. Cleaning your heat pump should be part of your home maintenance routine in order to keep the house as comfortable and worry-free as possible.

That is all well and good, but how do you go about cleaning the components of your heat pump. It’s one thing to advise you to clean, clean, clean…but it doesn’t do much good if you do not know how. To correct that, here are some tips to help you clean the different parts of your heat pump.

Caution: before doing any maintenance on your heat pump, including cleaning, be sure to turn off the power to the unit. This is a necessary safety measure.

Filters

  • If you use disposal air filters in your heat pump, skip this part. Just make sure to change them regularly, in accordance with the manufacturer’s instructions.
  • To clean air filters, follow the directions of the manufacturer that were included with the filter. This is also a good time to double check that the filters are installed properly.
  • Clean or replace your filters monthly during heavy use seasons, such as the warm summer months and cold months of late fall and winter.

Coils

  • Remove any debris from the outside of the coils and the surrounding area. Sticks and leaves may have accumulated near the outdoor coils, so just brush them away.
  • Using a soft brush attachment, vacuum the exterior of the coils. Take care not to bend or dent the coils.
  • Using a hose with a spray attachment, flush the coils with water from the inside out. This will remove any stubborn debris. Take care not to spray any electrical components, such as the fan or any nearby wires.
  • While you are inside the unit, vacuum the bottom inside to get rid of any more stray debris.

With that done, put everything back, replace the grille covers and power the heat pump back on. It should run smoothly with a fresh filter and no debris to gum up the works. Clean the coils every few months to keep the heat pump in tip top shape.

Continue Reading

What kind of noise can I expect my heat pump to make?

Wednesday, October 19th, 2011

Whenever you’re looking into replacing your old home heating system or installing a new one in Canby, there are many different factors you’ll have to take into consideration. The amount of noise that the system you choose will make is certainly one of these. And in addition to the amount of noise that this system will make, you’ll also want to make a note of where the unit will be placed and so where the noise will be coming from.

While you may have had to worry a bit about the noise generated by heat pumps in the past, it’s not something you’ll have to take into consideration this time around. That’s because newer heat pumps are designed to be quieter than ever, providing the same heating and cooling power with only a fraction of the noise of some earlier models.

In fact, the only part of a heat pump that really makes any noise at all is the outdoor unit. Unless this needs to be located very close to your home or to a window of a room that you use often, chances are that you won’t even hear it at all.

However, if you live very close to your neighbors or don’t have a lot of outdoor space, you may have to put the outdoor unit close to the walls of your home. Even then, though, you’ll hardly notice the noise your heat pump makes. Years of research and redesigning have produced some of the quietest heat pumps yet and that’s what you’ll be buying if you’re in the market for one of these systems now.

Newer heat pumps have been tweaked and adjusted to minimize the amount of noise-generating vibrations they produce. In fact, you’ll probably find that most of these units make no more noise than your refrigerator. They’re efficient and quiet and can keep your home comfortable all year long.

Continue Reading

How Much Will a High Efficiency Furnace Save Me?

Friday, October 7th, 2011

The furnaces you can buy these days in Woodburn are all much more energy efficient than those available even 10 years ago. However, that doesn’t mean that all of the current models are created equal. There is still a pretty big variation when it comes to energy efficiency and when it comes to price, so you need to really know what you’re looking for if you want to get the best deal out there.

The first thing you should understand when you’re trying to pick out a furnace is how energy efficiency for this type of equipment it measured. All furnaces come with an annual fuel utilization efficiency (AFUE) rating that reflects just exactly how energy efficient they are.

Any furnace you buy today will have an AFUE of at least 80%, but it’s possible to purchase models with AFUEs of 97% or more. Of course, energy efficiency is generally a good thing, but there are some other things to consider when you’re trying to decide just how energy efficient you need your new furnace to be.

What this calculation really comes down to is how much you’ll be able to save monthly and annually with a higher efficiency furnace. While your heating bills will certainly be lower the higher the furnace’s efficiency is, you will also pay more up front for the highest efficiency models.

This higher purchase price may be worth it, however, if you live in an area with particularly harsh winters. If your heating load is very high and you’ll be using your furnace a lot, your monthly savings will make up for the higher initial price of the high efficiency furnace in a reasonable amount of time.

However, if you live in an area with relatively mild winters and you won’t be demanding a whole lot of your furnace, then the amount you’ll save each month with the highest efficiency models really won’t add up to much.

Keep in mind that a furnace with an 80% AFUE is still quite efficient and will almost certainly save you a considerable amount monthly when compared to the unit you’re currently using.

Continue Reading

The Top 7 Mistakes Homeowners Make with Home Maintenance

Friday, September 30th, 2011

Maintaining your Gladstone home is important, but it must be done properly. Learn these common maintenance mistakes so you can avoid making them yourself.

  1. Forgoing Annual HVAC Maintenance -Your home’s heating, ventilation and cooling (HVAC) system should be thoroughly inspected each year. This is vital to keeping your house comfortable and energy efficient.
  2. Improper smoke and/or carbon monoxide detector maintenance – Smoke and carbon monoxide (CO) detectors should not just be installed properly, but also maintained properly. Test them monthly and replace drained batteries immediately.
  3. Ignoring manufacturer instructions – Not only instruction manuals are they important for proper installation of important equipment in your home, they also contain maintenance recommendations and schedules. Adhering to these instructions protects your investment in your home.
  4. Not replacing filters regularly – Speaking of regular maintenance, remember that the air filters in your furnace and air conditioning units need to be replaced regularly according to manufacturer recommendations.
  5. Not keeping gutters clean – Speaking of water damage, clogged gutters can overflow and cause problems in a hurry. Clean gutters and downspouts at the start of spring and regularly as needed.
  6. Insufficient cleaning (filters, ducts, vents, carpets, furnace room) – Keeping filters, vents and ductwork clean extends the life of your ventilation equipment and keeps energy costs down, as does vacuuming regularly and keeping your furnace room free of debris.
  7. Skimping on labor costs – Paying cheap rates for poor labor will cost more down the road when you have to hire another contractor to fix the first one’s mistakes.

There are other ways to err in home maintenance, but this list covers some of the more common doozies. In general, as long as you are careful, diligent and not afraid to call in professional help when needed, you will be just fine.

Continue Reading

How to Improve Your Indoor Air Quality

Monday, September 19th, 2011

When we think of air pollution we often think of outdoor “smog”, but the air in your Aurora home or office may also be polluted, even if it looks clean. Sources of indoor pollution include

  • Mold
  • Pollen
  • Cigarette smoke
  • Household cleaners
  • Household décor and furnishings (like rugs and paint)
  • Household pesticides (like rodent or ant-killers, or plant sprays)
  • Radon
  • Carbon monoxide
  • Building materials (like asbestos and lead)

Indoor air quality is of particular concern in newer, better-insulated homes, or in older homes that have been recently weatherized. The “tightness” of modern houses means that any pollutants that get into the home stay there – and perhaps even increase in concentration over time if the source of the pollution is inside the house.

Indoor air quality problems can cause discomfort and even serious disease, especially in children. The good news, though, is that there are many effective ways to improve indoor air quality.

There are two basic strategies for improving indoor air quality:

Air purification. Air cleaners range from small tabletop models to full-house models that are part of the central heating and cooling system. Small air purifiers are typically not very useful, but central air filters can be very effective at removing airborne contaminants. If your heating and cooling system does not include central air filtration, you should consider an upgrade to a new system.

It is important to note that air purification will not remove gases like carbon monoxide or radon from your home.

Source control. This is the most important indoor air quality strategy, and in many cases, the simplest one. Source control is definitely the most cost-effective strategy for improving indoor air quality, because purification requires a constant use of energy.

Switch to all-natural household cleaners, buy household furnishings made of natural fibers (instead of synthetic fibers that can “off-gas” volatile organic compounds). When painting, use VOC-free paint. Quit smoking, if you haven’t already.

And, don’t forget to install a carbon monoxide detector in your home, ideally next to the sleeping areas.

Continue Reading

Green House Gasses and Air Conditioners

Wednesday, August 17th, 2011

There’s simply no way around it: the air conditioner you probably depend on all summer to cool your Sherwood home is emitting a constant stream of greenhouse gasses contributing to the warming of the Earth. While it’s true that the coolants used today, hydrofluorocarbons (HFCs), are much less damaging than the chlorofluorocarbons (CFCs) initially used in air conditioning, they are still harmful to the environment.

Environmentally Friendly Coolants

Recently, research has led to the development of more environmentally friendly coolants. One in particular, HFO-1234yf, is scheduled to be introduced for use in the air conditioning systems of all GM cars beginning with the 2013 models. This is a step in the right direction, but much more needs to be done to address this growing problem before it’s too late.

Electricity and Carbon Dioxide

The use of environmentally friendly coolants will only go so far towards curbing the environmental impact of air conditioning. That’s because air conditioners are universally powered by electricity, and electricity is almost universally produced by the burning of fossil fuels like coal. When coal is burned, it generates a great deal of carbon dioxide, a substantial pollutant on its own.

An Intensifying Cycle

Of course, the more carbon dioxide and other greenhouse gasses are introduced into the atmosphere, the hotter the planet will become. And as the average temperature rises, air conditioning will be used more and more to combat these effects. This is a cycle that could quickly spiral out of control if something is not done to disrupt it.

What You Can Do

There are several things you can do if you’re concerned about how your air conditioning usage impacts the environment. First of all, make the switch as quickly as possible to HFO-1234yf or a similarly environmentally-friendly coolant when it becomes available. And remember that the air conditioning in your car counts too.

You can also go a long way towards reducing your contribution to greenhouse gas emissions by keeping your overall energy consumption down. Try relying on other, natural methods of cooling your home as much as possible. And when you do turn on your air conditioner, make sure you use all of the energy being consumed as efficiently as possible.

That means keeping your unit in good shape to maintain its energy efficiency and making sure that your home is properly sealed and insulated so your air conditioner doesn’t have to work overtime maintaining a comfortable indoor temperature.

Continue Reading

Pest Control

Wednesday, July 6th, 2011

Pests are a virtual inevitability in every home at some point, so it is important for every homeowner to know how to deal with that unwelcome stranger when it comes poking around.

Insects Be Gone

From ants to roaches, insects love to make themselves right at home. They invade in search of food, water, and habitable space, and they don’t care whether they are wanted or not. Here are some helpful hints to get rid of these multi-legged tenants.

Borax works just as well as a pest poison as more expensive commercial products. For roaches, sprinkle a bit in your cabinets. Make sure to take extra care that your dishes are free from the residue. Avoid areas where the borax could affect children or pets. Likewise, make a homemade ant trap by mixing equal parts sugar and borax in a jar with holes punched in the lid.

Ants are also repelled by the calcium carbonate found in common chalk. Draw a chalk line around any visible ant holes to keep them trapped inside. Keep termites away by keeping your yard free of wood debris and standing water. Fix any leaks immediately and clear out any thick growth close to the house.

Furrier Pests

Insects are not the only pests to be concerned with, as sometimes intruders come in a larger, furrier form. Mice and other small rodents are fairly common inhabitants, as well as the occasional garbage-scavenging raccoon.

The best way to keep animals from invading your home is to keep potential entry holes sealed. For a temporary fix, try stuffing small holes with steel wool and covering larger ones with wire mesh. Eventually, however, you should have all holes permanently filled by an exterminator or a contractor who is familiar with the strategies needed to stop these unwanted invaders.

In general, it’s best to avoid poisons that put your family or pets at risk. Not only do poisons create a dangerous environment, they often result in dead pests in your walls or under your floorboards where they are hard to remove. Traps are always best so you know where the rodents are at all times.

If you have tried these tricks to no avail, or you have a serious infestation problem, don’t be a hero. Call a professional and have the whole home treated so you can rest easy.

Continue Reading