The Clean Air Act Blog: Posts Tagged ‘Wilsonville’

Air Conditioners and Humidity: How do they coincide?

Friday, August 5th, 2011

Ever wonder why all of those air conditioners hanging out of people’s windows in Wilsonville are constantly dripping water on hot summer days? All they’re actually doing is disposing of the moisture they’ve removed from the indoor air. That’s right – air conditioners are dehumidifiers too.

When you think about it, it makes a lot of sense. After all, you know how much more uncomfortable 90° is when the humidity’s up around 90% than when it’s closer to 60%. Of course, some air conditioners are better at removing moisture from the air than others, so you should definitely consider how well an air conditioner dehumidifies when evaluating your air conditioning options.

Why Humidity Matters

High humidity, even at lower temperatures is uncomfortable. But there are more reasons than simple comfort to want an air conditioner that reduces indoor humidity levels. For instance, high levels of humidity promote the growth and spread of several allergens like dust mites and mold spores. High indoor humidity can also cause problems for the wood fixtures and furnishings in your home.

The Importance of Proper Sizing

Most air conditioners do a decent job of controlling humidity indoors. But depending on the severity of your problem and the typical levels of humidity in your area during the summer months, you may want to pay special attention to each unit’s capabilities when evaluating your options.

An air conditioner’s ability to maintain proper humidity levels indoors has a lot to do with how well it’s matched to the size of your room as well. An air conditioner that’s too small likely won’t get the humidity or the temperature down to a comfortable level. On the other hand, that doesn’t necessarily mean that bigger is better.

In fact, an air conditioner that’s too large for the space you’re using it to cool will have a hard time bringing down the humidity level. Sure, you’ll wind up with a cold room, but that room will remain damp, making it no more comfortable than it was before the air conditioner was turned on.

For all of these reasons, it’s important to carefully evaluate your options when buying an air conditioner and make sure that the unit you buy is the right kind and size for the area you’re cooling. A little extra time spent researching your options will make your home infinitely more comfortable this summer.

Continue Reading

A Different Way to Zone Your Heating

Monday, May 30th, 2011

One of the most frustrating things about traditional heating is that you must pay for the entire home to be heated. You flip on the thermostat and you get the same temperature for every room. Vent covers can reduce how much heat gets to each room, but if you want one room to be cooler than another, how do you do it without installing an expensive zone control system?

Vent Levers for Adjustable Air Flow

The easiest way to control the flow of air in your heating system is to use a vent lever adjustable air flow system that allows you to actually control where the air goes. These systems are installed directly on your furnace’s air handler. Each vent lever can be attached to a specific thermostat in your house or the vent levers can be opened and closed manually from the basement. When one of the thermostats is turned off, a vent lever will close off air flow to that particular room and stop any heat from being distributed there.

The system itself is not as easy to use as a zone control system but because the technology is simple and it takes only a few seconds to the turn the vent levers, it’s a viable and effective method to control your heating if you cannot afford zone control. If you’re not sure whether this is a good solution for your particular furnace, an HVAC contractor can help.

How to Get Vent Levers Installed in Your Home

If this sounds like a good solution for you, take some time and contact your local HVAC service provider to learn more about what it takes to have vent levers installed. For some systems it is relatively easy to add them to an existing air handler. In older systems or in the case of a boiler, you may need to install more specific types of handlers to control the flow of heating to each room in your home. A professional can give you a better idea of what your home needs and how it can best be setup.

Continue Reading